|
|
Overview
|
HP Compaq Business Desktop d220 microtower |
HP recommends Microsoft® Windows® XP Professional |
|
Microtower | |||
|
35.5 x 18.0 x 39.0 centimeters/14.0 x 7.1 x 15.4 inches | |||
![]() | |||
| 1. | Monitor Sold Separately | 6. | 2 3.5" internal bays |
|
2. | 2-Button Scroll Mouse | 7. | Optional 3.5" diskette drive |
|
3. | Basic Windows Keyboard | 8. | Expansion: 3 full-height PCI slots |
|
4. | 2 USB 2.0 | 9. | Rear
I/O: 4 USB 2.0, 1 serial, 1 parallel, 2 PS/2, 1 RJ-45, 1 VGA, audio in/out, mic in |
| 5. | 2 5.25" external bays for CD-ROM, DVD-ROM, CD-RW or Combo Drives |
10. | 200W Power Supply |
| At A Glance |
|
| What's New |
|
|
|
Available Technology and Features
| Processors | Intel Celeron | L2 Advanced Transfer Cache |
| 2.0GHz with 400MHz FSB | 128K | |
| 2.1GHz with 400MHz FSB | 128K | |
| 2.2GHz with 400MHz FSB | 128K | |
| Intel Pentium 4 | ||
| 2.4GHz with 533MHz FSB | 512K | |
| 2.66GHz with 533MHz FSB | 512K | |
| 2.8GHz with 533MHz FSB | 512K | |
| | ||
| Operating Systems and Application Software | Microsoft Windows XP Home SP1 |
| Microsoft Windows XP Professional SP1 | |
| Mandrake Linux 9.1 | |
| Microsoft Works | |
| Norton AntiVirus 2003 | |
|
| |
| Hard Drives | 40GB 5400 rpm SMART III Ultra ATA/100 |
| 40GB 7200 rpm SMART III Ultra ATA/100 | |
| 80GB 5400 rpm SMART III Ultra ATA/100 | |
| 80GB 7200 rpm SMART III Ultra ATA/100 | |
|
| |
| System Memory | 128MB DDR SDRAM PC2700 (333-MHz) non ECC |
| 256MB DDR SDRAM PC2700 (333-MHz) non ECC | |
| 384MB DDR SDRAM PC2700 (333-MHz) non ECC | |
| 512MB DDR SDRAM PC2700 (333-MHz) non ECC | |
|
| |
| Removable Storage | 1.44-MB diskette drive |
| | |
| Optical Storage | 48X CD-ROM drive |
| 48X/12X/48X CD-RW drive | |
| 48X Combo drive (CD-RW & DVD-ROM) | |
| 16X/40X DVD-ROM drive | |
| | |
| Keyboard | Basic Windows keyboard |
| | |
| Mouse | 2-button scroll mouse |
| USB 2-button optical scroll mouse | |
|
| |
| Audio | AC '97 (integrated) including an internal PC speaker |
| | |
| Communication | Broadcom BCM4401 10/100 Ethernet solution (integrated) |
| High Speed 56K PCI Win Modem | |
| | |
| Graphics | Intel Extreme Graphics (integrated with chipset) |
|
|
System Details
| Base Unit | uATX microtower chassis, including power supply, bezel, and five (5) drive bays |
| Microsoft or Linux operating system CD | |
| active heatsink | |
| Motherboard with Intel 845GV chipset, Broadcom BCM4401 10/100 network interface, integrated graphics and audio, 3 ea. PCI slots, 2 ea. DDR DIMM slots | |
| (2) ATA data cables (3) headed; each cable supports two drives | |
| product documentation on CD | |
| HP Restore CD | |
| Power Cord | |
|
|
|
| Slots | PCI | 3 full-height slots on PCA |
| Memory Expansion | 2 DIMM slots (2.0GB maximum memory support) | |
| | ||
| Bays | Internal | (2) 3.5-inch half-height |
| External | (2) 5.25-inch half-height | |
| (1) 3.5-inch half-height | ||
| | ||
| USB Support | EHCI high-speed USB 2.0 controller |
| (2) front ports; (4) rear ports | |
|
|
|
| Interfaces (Legacy) | 1 ea. parallel port |
| 1 ea. serial port | |
| 1 ea. PS/2 keyboard port | |
| 1 ea PS/2 mouse port | |
| 1 ea. VGA video port | |
| 1 ea. line in; 1 ea. line out; 1 ea. mic in | |
|
|
|
| Chassis Weight & Dimensions | Net Weight | 26.5 lb (12.0 kg) |
| H x W x D | 14.0 x 7.1 x 15.4 in (35.5 x 18.0 x 39.0 cm) | |
| | ||
| Packaged Unit Weight & Dimensions | Net Weight | 28.0 lb (17.8 kg) |
| H x W x D | 11.3 x 19.9 x 21.6 in (28.8 x 50.6 x 54.8 cm) | |
| | ||
| Supported
Technology & Features | Memory Type | DDR SDRAM PC2100 (266MHz) non-ECC |
| DDR SDRAM PC2700 (333MHz) non-ECC | ||
| 2.0GB maximum system memory | ||
| Serial Presence Detect Support | Yes | |
| Hard Drive Interfaces Supported | SMART III Ultra ATA/100/66/33 | |
| Hard Drive Controller (PCI) Supported | SMART III Ultra ATA/100/66/33 | |
| | ||
| Intel Pentium 4 CPU | Coprocessor | Integrated |
| CPU Socket Type/ Number | Socket N 478 pin | |
| CPU Package | FC-PGA2 | |
| Front Side Bus Speed | 533 MHz | |
| Cache Memory | 512-KB L2 Advanced Transfer Cache | |
| 12-KB micro-op trace cache | ||
| 8-KB L1 data cache | ||
| | ||
| Intel Celeron CPU | Coprocessor | Integrated |
| CPU Socket Type/ Number | Socket N 478 pin | |
| CPU Package | FC-PGA2 | |
| Front Side Bus Speed | 400-MHz | |
| Cache Memory | 128-KB L2 Advanced Transfer Cache | |
| 16-KB L1 data cache | ||
| 16-KB L1 instruction cache | ||
| | ||
| Chassis | Front Panel | Power button |
| Power On LED | ||
| HDD Activity LED | ||
| System Board Form Factors Supported | Standard uATX | |
| Cooling Solutions Supported | Power Supply Fan (variable speed) | |
| Processor fan/heatsink (variable speed) | ||
| Chassis fan | ||
| Slots Supported | 3 ea. Full-height, half-length PCI slots | |
| Front I/O | 2 ea. USB 2.0 | |
| Rear I/O | Standard uATX I/O Connectors | |
| Drive Bays | 2 ea. 5.25 inch external | |
| 1 ea. 3.50 inch external | ||
| 2 ea. 3.50 inch internal | ||
| Internal Speaker | Yes | |
| Power Supply | ATX Power Supply PFC/non-PCF with a 115v/230v line switch (varies by country/region) | |
| | ||
Unit
Environment | General Unit Operating Guidelines
| |
| Temperature Range | Operating Temperature: 50° to 95° F (10° to 35° C) | |
| Non-operating Temperature: 22° to 140° F( 30° to 60° C) | ||
| Relative Humidity | Operating Humidity 10% to 90% (non condensing at ambient) | |
| Non-operating Humidity 5% to 95% (non condensing at ambient) | ||
| Maximum Altitude (unpressurized) | 10,000 ft (3048 m) | |
| 30,000 ft (9144 m) | ||
| NOTE: Operating temperature is de-rated 1.0 deg C per 300 m (1000 ft) to 3000 m (10,000 ft) above sea level, no direct sustained sunlight. Maximum rate of change is 10 deg C/Hr. The upper limit may be limited by the type and number of options installed. | ||
| | ||
| Motherboard | Architecture | P4/PCI/AGP 4x |
| Chipset | Intel 845GV | |
| I/O Controller | Super I/O 3 | |
| System Board Form Factor | Standard uATX | |
| Processor Socket | 462-pin ZIF | |
| DIMM
Connectors (2.5 V) | 2 ea. on motherboard | |
| Graphics | Integrated 4x AGP | |
| PCI Connectors (5.0 V) | 3 ea. on motherboard | |
| Flash ROM | Yes | |
| Audio | Integrated AC 97 | |
| CD ROM IN (Audio) | Yes | |
| Clear CMOS | Yes | |
| CPU Fan Header | Yes | |
| Chassis Fan Header | Yes | |
| Chassis Speaker Header | Yes | |
| CMOS Battery Holder Lithium | Yes | |
| Hood Lock Header | No | |
| Hood Sense Header | No | |
| Multibay Header | No | |
| Multport Header | No | |
| NIC supported features | Wake-On-LAN | |
| Power Supply Header | Yes | |
| Power Switch, Power LED & Hard Drive LED Header | Yes | |
| Password Clear Header | Yes | |
| Riser Connector | No | |
| | ||
| Interfaces | I/O Chip | Super IO 3 |
| Serial Port/UART Type | One Serial Port/SN75185 | |
| Parallel Port | One Parallel Port | |
| USB (2.0) | 6 ports total | |
| 4 rear/2 front | ||
| Infrared Port | No | |
| Network | RJ-45 | |
| Keyboard | Yes (PS/2) | |
| Mouse | Yes (PS/2) | |
| Video | Yes | |
| Audio | Yes | |
| | ||
| Broadcom BCM4401 10/100 Ethernet solution | |||
| Network Interface | Features |
| |
| Performance | The
BCM4401 10/100 Ethernet function incorporates a complete IEEE 802.3u compliant
MAC and PHY. The MAC also supports management functions including RMON, Ethernet-like
MIB, and IEEE 803.2u Ethernet MIB. The 10/100 PHY uses Broadcom's advanced Digi-PHY
architecture for low power and includes Advanced Power Management. The 10/100
PHY also supports auto-negotiation and HP Auto-MDIX functions to eliminate installation
errors. By leveraging the NetXtreme BCM570x Gigabit Ethernet driver architecture and the complete proven advanced software suite, the BCM4401 10/100 solution brings enterprise-proven technology for migrating business desktops and laptops to Gigabit performance. | ||
| Specifications | Connector | RJ-45 | |
| Controller | Broadcom BCM4401 PCI LAN controller | ||
| Memory | Integrated 96Kb frame buffer memory | ||
| Data rates | 10/100 Mbps | ||
| Compliance | IEEE 802.1A, 802.1P, 802.1P, 802.1Q, 802.2, 802.3, 802.3AB and 802.3u compliant, 802.3x flow control | ||
| Bus architecture | PCI 2.2 | ||
| Data path width | 32-bit, 33/66-MHz bus interface | ||
| Data transfer mode | Bus-master DMA | ||
| Hardware certifications | FCC, B, CE, TUV- cTUVus Mark Canada and United States, TUV- GS Mark for European Union | ||
| Power requirements | 1.48 watts @ +3.3V AUX supply with 5V tolerance | ||
| Boot ROM support | Yes | ||
| Network transfer rate | 10BASE-T (half-duplex) 10-Mbps | ||
| 10BASE-T (full-duplex) 20-Mbps | |||
| 100BASE-TX (half-duplex) 100-Mbps | |||
| 100BASE-TX (full-duplex) 200-Mbps | |||
| | |||
| Power Supply | Power Supply | ATX Power Supply PFC/Non PCF with a 115v/230v line switch |
| Full
Ranging Input (No Line Select Switch) | No | |
| Active Power
Factor Correction (APFC) (Input Current is nearly 1/2 a non-APFC PS) | No | |
| Passive Power Factor Correction (PFC) | Yes (with line switch set to 230V No PFC in 115V line switch position) | |
| Operating Voltage Range | 90 to 132VAC, or 180 to 264VAC | |
| Rated Voltage Range | 100 to 127 VAC, or 200 to 240VAC | |
| Rated Line Frequency | 50-60 Hz | |
| Operating Line Frequency Range | 47-63 Hz | |
| Maximum Rated Power | 200W | |
| PS Fan | 80-mm fan integrated in power supply variable speed for optimum acoustics | |
| Processor Fan | Variable speed fan | |
| | ||
| Power Conservation Energy Saver' | Energy Star Compliant | Yes |
| APM 1.2 Support | Yes | |
| Screen Blanking | Yes | |
| Hard Drive Idle' Mode | Yes | |
| System Idle Mode | Yes | |
| Cache Memory Power-Down | No | |
| Blue Angel Compliant (<5w in S5 - Power Off) | Yes | |
| Power Consumption in ES Mode Suspend to RAM (S3) (Instantly Available PC) | ~2W | |
| Processor/Cache Memory Power-Down (S3) | Yes | |
| CD-ROM Spins Down when not in use | Yes | |
| | ||
| Measured
Acoustic Noise Emission (ISO 7779) | Sound Power Level | System Idle | LwA < 4.3 bels |
| HDD Random | LwA < 4.6 bels | ||
| ODD Sequential | LwA < 5.0 bels | ||
| FDD Copy | LwA < 5.0 bels | ||
| Sound Pressure Level | System Idle | LpA < 32 db | |
| HDD Random | LpA < 35 db | ||
| ODD Sequential | LpA < 42 db | ||
| FDD Copy | LpA < 40 db | ||
| | |||
| System Environmental Specs | Shock | Operating (*Using Half-Sine shock pulse) | 6 faces, 102G, 2ms < pulse <3ms, 162cm/s |
| Non-Operating (*Using Trapezoidal shock pulse) | 6 faces, 40G, 13ms, 422cm/s | ||
| Vibration | Operating | Random vibration at 10 Hz to 300 Hz, 0.0001~0.00001 G² Hz, 0.25 Grms | |
| Non-Operating | Random vibration at 0.0008 G²/Hz, 10 Hz to 500 Hz, 2.0Grms | ||
| Relative Humidity | Operating (maximum wet bulb temp., non-condensing) | 80% relative humidity (Rh), 95° F (35° C) | |
| Non-operating,
with packaging (maximum wet bulb temp., non-condensing) | 90%
relative humidity (Rh), -4° F ~ 140° F (-20° C ~ 60° C) | ||
| Altitude
Max (un-pressurized) | Operating (Maximum allowable altitude change rate is 1500 ft/min.) | 0 to 10,000 ft (3,048 m) This value may be limited by the type and number of options installed. | |
| Non-operating, with packaging (Maximum allowable altitude change rate is 1500 ft/min) | 0 to 30,000 ft (9,144 m) | ||
| | |||
| Service and Support | On-site Warranty Note 1 This one-year (1-1-1), limited warranty delivers one year of on-site, next business-day Note 2 service for parts and labor and includes free telephone support Note 3 24 x 7. Global coverage Note 2 ensures that any product purchased in one country and transferred to another non-restricted country will remain fully covered under the original warranty and service offering. One-year onsite and labor are not available in all countries. |
| NOTE 1: Terms and conditions may vary by country. Certain restrictions and exclusions apply. | |
| NOTE 2: On-site service may be provided pursuant to a service contract between Compaq and an authorized Compaq third-party provider, and is not available in certain countries. Global service response times are based on commercially reasonable best effort and may vary by country. | |
| NOTE 3: Technical telephone support applies only to Compaq-configured Compaq and third-party Compaq-qualified hardware and software. Toll-free calling and 24 x 7 support may not be available in some countries. |
|
|
After-Market Options
| Communications | Lucent high speed 56K PCI Win Modem | DC131A#xxx |
| Intel Pro/1000 MT 10/100/1000 Network Adapter | DC193A | |
| | ||
| Hard Disk Drives | SMART III Ultra ATA/100 Hard Drive | |
| 40-GB 7200 rpm SMART III Ultra ATA/100 Hard Drive with DPS | DC180A | |
| 80-GB 7200 rpm SMART III Ultra ATA/100 Hard Drive with DPS | DC181A | |
| | ||
| Removable Storage Devices | Drive Key Options | |
| 256-MB HP Drive Key II (USB 2.0) | PH657A | |
| Zip Drives | ||
| ZIP 250 Drive | DC140B | |
|
|
||
| Input Devices | Keyboards | |
| HP PS/2 Easy Access keyboard | DC167B#xxx | |
| HP USB Easy Access Smartcard keyboard | DC169B#xxx | |
| Mice | ||
| HP PS/2 2-Button Scroll Mouse | DD440B | |
| HP USB 2-Button Scroll Mouse | DD441B | |
| HP USB 2-Button Optical Scroll Mouse | DC172B | |
| | ||
| Memory | PC2700 (333 MHz) DDR SDRAM non-ECC | |
| 128-MB DDR SDRAM PC2700 (333-MHz) non-ECC | DC338A | |
| 256-MB DDR SDRAM PC2700 (333-MHz) non-ECC | DC339A | |
| 512-MB DDR SDRAM PC2700 (333-MHz) non-ECC | DC340A | |
| | ||
| Audio | JBL Platinum Series Speakers | DE893B#xxx |
| | ||
| Optical Drives | 16X/40X DVD-ROM | DC151B |
| 48X Max CD-ROM Drive | DC143B | |
| 48X/24X/48X CD-RW Drive | DC196B | |
| 48X Combo Drive CD-RW & DVD-ROM | DC197B | |
| | ||
| Monitors | Essential Series | |
| HP s9500 CRT Monitor
(19") | P9010A#ABA | |
| HP L1502 Flat Panel Monitor (15" analog only) | P9617D#ABA | |
| HP L1702 Flat Panel Monitor (17" analog only) | P9621D#ABA |
|
|
Memory
| DDR
SYNCH DRAM DIMM Non-ECC Memory It is not necessary to add memory in pairs or kits. Memory upgrades are accomplished by adding single or multiple DIMMs of the same or varied sizes. This chart does not represent all possible memory configurations. |
| 845GV chipset (128-MB) |
| DDR SYNCH DRAM DIMM Non-ECC Memory |
|
Standard Memory |
| Maximum
Memory Intel 845GV Chipset supports up to 2-GB of DDR SYNCH DRAM. Platform can utilize 2-GB of memory when 1-GB DIMMs are available with the installation of optional DDR SYNCH DRAM Memory Kits. |
| Memory | Slot | ||
| 1 | 2 | ||
| Standard | 128-MB | 128-MB | Empty |
|
Maximum Memory when 1-GB available | 2-GB | 1-GB | 1-GB |
|
NOTE: HP Compaq Business Desktop d220 models contain two DIMM slots, but can only be upgraded to a maximum of 2-GB when 1-GB DDR SYNCH DRAM are available. |
| NOTE: 1-GB DDR SYNCH DRAM not currently offered as after-market options. |
| NOTE: It is not necessary to add memory in pairs or kits. Memory upgrades are accomplished by adding single or multiple DIMMs of the same or varied sizes. This chart does not represent all possible memory configurations. |
| 845GV chipset (256-MB) |
| DDR SYNCH DRAM DIMM Non-ECC Memory |
| Standard
Memory 256-MB DIMM Standard |
| Maximum Memory Intel 845GV Chipset supports up to 2-GB of DDR SYNCH DRAM. Platform can utilize 2-GB of memory when 1-GB DIMMs are available with the installation of optional DDR SYNCH DRAM Memory Kits. |
| Memory | Slot | ||
| 1 | 2 | ||
| Standard | 256-MB | 256-MB | Empty |
|
Maximum Memory when 1-GB available | 2-GB | 1-GB | 1-GB |
| NOTE: HP Compaq Business Desktop d220 models contain two DIMM slots, but can only be upgraded to a maximum of 2-GB when 1-GB DDR SYNCH DRAM are available. |
| NOTE: 1-GB DDR SYNCH DRAM not currently offered as after-market options. |
| NOTE: It is not necessary to add memory in pairs or kits. Memory upgrades are accomplished by adding single or multiple DIMMs of the same or varied sizes. This chart does not represent all possible memory configurations. |
|
|
Storage
|
|
| HP Compaq Business Desktop d220 | |||
|
| |||
| Maximum Quantity Supported | Position Supported | Controller | |
| Drive Support | |||
| Diskette Drives | 1 | 3 | Super I/O |
| Tape Drives | 2 | 1, 2 | IDE |
| CD-ROM Drives | 2 | 1, 2 | IDE |
| DVD-ROM Drives | 2 | 1, 2 | IDE |
| CD-RW Drives | 2 | 1, 2 | IDE |
| Ultra ATA/100 Hard Drives | Up to 3 | 1, 2, 4, 5 | Ultra ATA/100 |
| SCSI Hard Drives | Up to 3 | 1, 2, 4, 5 | SCSI |
| NOTE: SCSI hard drives require installation of a SCSI adapter card. | |||
| NOTE: Adding additional tape drives, DVD-ROM, CD-RW or hard drives will require the removal of other devices. | |||
|
|
Technical Specifications - Audio
| Integrated ADI 1981A Audio | Type | Integrated | |
| AC 97 Stereo Codec | Yes | ||
| OPL3 FM Synthesis Support | Yes | ||
| Sound Blaster Compatibility | Yes | ||
| Audio Jacks | Mic-In (20-K ohm Input Impedance) | ||
| Line-In (12-K ohm Input Impedance) | |||
| Line-Out * (less than 800 ohms Output Impedance, expects at least a 10-K ohm load) | |||
| Headphone-Out (2.5 Ohms Output Impedance, expects at least a 32 ohm load) | |||
| NOTE: *Internal Speaker Amplifier is for Internal Speaker only. External Speakers need to be powered externally. | |||
| Sampling | 7KHz-48KHz | ||
| Compression | ADPCM, ESPCM | ||
| Wavetable Syntheses (software) | Yes | ||
| 3D Positional Sound | No | ||
| Analog Audio | Number of Channels on Line-Out (mono/stereo) | Stereo (Left & Right channels) | |
| Internal Audio Speaker Power Rating | 3W | ||
| Internal Tuned Port Speaker | Yes | ||
| External Speaker Jack (Line-Out) | Yes | ||
|
|
Technical Specifications - Graphics
|
Intel Extreme Graphics (Integrated with Intel 845G chipset) | Bus Type | Integrated |
| AGP Interface | Supports
a single 1.5v Accelerated Graphics Port Interface, Specification 2.0 compliant
device Supports 1x/2x/4x data transfers and 2x/4x fast writes 32-deep AGP request queue AGP signals multiplexed with two DVO ports Supports ADD (AGP Digital Display) cards | |
| Core frequency | 200 MHz | |
| 3D setup and render engine | Discrete
Triangles, Strips, and Fans support Indexed vertex and flexible vertex formats Pixel accurate fast scissoring and clipping operation Backface culling support Supports D3D and OGL pixelization rules Anti-aliased lines support Spirte points support | |
| High quality texture engine | Per
pixel perspective corrected texture mapping Single pass texture compositing (multi-textures) at rate 12 levels of detail MIP map sizes from 1x1 to 2Kx2K All texture formats including 32-bit RGBA Alpah and luminance maps Texture chroma-keying Bilinear, trilinear and anisotropic MIP-mapped filtering Cubic environment reflection mapping Embossed bump-mapping DOT3-based bump-mapping DXTn texture decompression FXT1 texture decompression | |
| 3D graphics rasterization enhancements | 200 megapixel/sec
fill rate Flat and Gouraud shading Color alpha blending for transparency Vertex and programmable pixel fog and atmospheric effects Color specular lighting Z Bias support Dithering Anti-Aliasied lines 16 and 24-bit Z buffering 16 and 24-bit W buffering 8-bit stencil buffering Double and triple render buffer support 16 and 32-bit color Destination alpha Maximum 3D resolution supported 1600 x 1200 x 32 @ 85Hz Fast clear support | |
| 2D Graphics | Optimized 256 bit
BLT (Block Transfer) Engine GDI+ feature support Alpha stretch blither Anti aliased lines 32-bit alpha blended cursor Programmable 3-color transparent cursor Color space conversion 8, 16, and 32-bit color ROP support | |
| Video DVD/PC-VCR | Dynamic
Bob and Weave support for video streams Synclock display and TV out to video source Source resolution up to 720 x 480 with 2 vertical taps Software DVD at 30 fps (frames per second), full screen |
| Video Overlay | Single scalable overlay Multiple overlay functionality provided via stretch blitter (PIP, video conferencing, etc.) 5 tap horizontal, 2 tap vertical filtered scaling Independent gamma correction Independent brightness/contrast/saturation Independent tint / hue support Destination color keying Source chroma keying Maximum source resolution: 720 x 480 (576) Maximum overlay display resolution: 1600 x 1200 x 32 @ 60Hz, 1280 x 1024 x 32 @ 85hz. | |
| Display | Analog
display support 350Mhz integrated 24-bit RAMDAC Up to 2048 x 1536 @ 60Hz refresh Hardware color cursor support DD2CB compliant interface Multiplexed digital display channel Two channels multiplexed with AGP 165Mhz dot clock on each 12 bit interface Can combine two 12-bit channels to form one 24-bit channel Supports flat panels up to 2048 x 1536 @ 60Hz or dCRT/HDTV @ 1920 x 1080 @ 85Hz Supports hot plug and display Supports LVDS, TMDS transmitters or TV-out encoders ADD card utilizes AGP connector Three Display Control Interfaces (I2C/DDC) multiplexed on AGP |
| Refresh Rate with Memory Indicated | |||
| Resolution (Horizontal x Vertical) | Color
Depth (Bits per Pixel) | Refresh Rate (Hz) | |
| 640 x 480 | 8,16 and 32 | 85, 85 and 85 | |
| 800 x 600 | 8,16 and 32 | 85, 85 and 85 | |
| 1024 x 768 | 8,16 and 32 | 85, 85 and 85 | |
| 1280 x 1,024 | 8,16 and 32 | 85, 85 and 85 | |
| 1600 x 1200 | 8,16 and 32 | 85, 85 and 85 | |
| 1900 x 1440 | 8,16 and 32 | 75, 75 and N/A | |
|
|
Technical Specifications - Hard Drives
| 5400 rpm SMART III Ultra ATA/100 Hard Drives | 40-GB | Capacity | 40,000 MB | |
| Rotational Speed | 5400 rpm | |||
| Interface | Ultra ATA/100 | |||
| Height | 1 in (25.4 mm) | |||
| Width | 3.5 in (88.9 mm) | |||
| Transfer Rate Synchronous (Maximum) | 100 MB/s | |||
| Seek Time (typical reads, including settling) | Single Track | 1.2 ms | ||
| Average | 8 ms | |||
| Full-Stroke | 18 ms | |||
| Physical Configuration | Logical Blocks | 78,165,360 | ||
| Operating Temperature | 41° to 131° F (5° to 55° C) | |||
|
| ||||
| 7200 rpm SMART III Ultra ATA/100 Hard Drives | 40-GB | Capacity | 40,000 MB | |
| Rotational Speed | 7200 rpm | |||
| Interface | Ultra ATA/100 | |||
| Height | 1 in (25.4 mm) | |||
| Width | 3.5 in (88.9 mm) | |||
| Transfer Rate Synchronous (Maximum) | 100 MB/s | |||
| Seek Time (typical reads, including settling) | Single Track | 1.2 ms | ||
| Average | 8 ms | |||
| Full-Stroke | 18 ms | |||
| Physical Configuration | Logical Blocks | 78,165,360 | ||
| Operating Temperature | 41° to 131° F (5° to 55° C) | |||
|
|
Technical Specifications - Optical Storage
| 48X Max CD-ROM Drive | Interface | ATAPI IDE | |
| Data Buffer | 16.6 Mbps | ||
| Data Transfer Rate | Sustained 150 Kbps minimum (audio) | ||
| Variable (CD) 3,000 to 7,200 Kbps | |||
| Disk Rotation Technology | CAV (Constant Angular Velocity) | ||
| Access Time (ms) | Random: <100 ms | ||
| Full-stroke seek: <150 ms | |||
| Average Access Time | < 80 ms | ||
| Cache Buffer (standard/maximum) | 128 KB | ||
| Disk Formats Read | Multi-session Photo CD, multi-read CD-ROM, CD text, audio CD, CD-I, CD-RW, CD-R, CD-Extra, CD-ROM XA | ||
| Disk Formats Written | None | ||
| Disk Capacity (CD) | 650 MB | ||
| Block Size | Mode 1 2,048 bytes | ||
| Mode 2 2,340/2,336 bytes | |||
| CD-DA 2,352 bytes | |||
| CD-XA 2,328 bytes | |||
| Diameter | 12 cm; 8 cm | ||
| Thickness | 1.2 mm | ||
| Track Pitch | 1.6 µm | ||
| Audio Output Level | Line-out 0.7 V @ 47 Kohm | ||
| Headphone 0.6 V @ 32 ohm | |||
| Startup Time | <7 seconds (typical); < 30 seconds with multi-session | ||
| Operating Conditions | Temperature | 41° to 113° F (5° to 45° C) | |
| Relative Humidity | 10% to 80% | ||
| Dimensions (H x W x D, maximum) | 1.7 x 5.9 x 8.2 in (4.3 x 15.0 x 20.8 cm) | ||
| Weight | 2.6 lb (1200 g) | ||
| Operating Systems Supported | Microsoft® Windows® NT 4.0, Microsoft Windows 2000, and Microsoft Windows XP | ||
| MPEG Playback Graphics Solution Support | None | ||
| | |||
| 48X/24X/48X CD-RW Drive | Orientation | Either horizontal or vertical | ||
| Disc Loading Mechanism | Half-height, tray load | |||
| Interface Type | ATAPI IDE | |||
| Dimensions external (W x H x D) | 7.99 x 5.88 x 1.71 in (203 x 149.5 x 43.5 mm) | |||
| Weight | 2.6 lb (1.2 kg) | |||
| Disc Diameter | 12 cm, 8 cm | |||
| Disc Thickness | 1.2 mm | |||
| Track Pitch | 1.6 m µm | |||
| Disc Center Hole Diameter | 15 mm | |||
| Reference Scanning Velocity | 1.2 m/s | |||
| Recording/Playing Time | 80 minutes with CD-R media | |||
| Read Only Disc Prameters | Formats and Modes Supported | CD-ROM
Mode 1; CD-ROM XA Mode 2 (forms 1 and 2); CD digital audio; CD Extra;
CD-I Mode 2 (forms 1 and 2) and CD-I-Ready; Photo CD (single and multi-session); video CD | ||
| Capacity | 185 MB (Mode 2, 8cm); 540 MB (Mode 1, 12 cm); 650 MB (Mode 2, 12 cm); 700 MB (Mode 2, 12 cm) | |||
| Block Size | Mode 1
2,048 and 2,352 bytes; mode 2, form 1 2,048; 2,328; 2,336; 2,340 and 2,352 bytes; mode 2, form 2 2,328; 2,336; 2,340 and 2,352 bytes; CD-DA 2,352 and 2,368 bytes | |||
| Writeable Disc Parameters | Disc Type | CD-R and CD-RW | ||
| Write Methods | Disc at Once, Track at Once, Session at Once, Variable Packet, Fixed Packet | |||
| Format and Modes Supported | CD-ROM (mode 1); CD-ROM XA (mode 2, forms 1 and 2); CD digital audio, CD-I (mode 2, forms 1 and 2); video CD | |||
| Capacity | 185 MB (Mode 2, 8cm); 540 MB (Mode 1, 12 cm); 650 MB (Mode 2, 12 cm); 700 MB (Mode 2, 12 cm) | |||
| Block Size | Mode 1 2,048 bytes; mode 2, form 1 2,048 and 2,352 bytes; mode 2, form 2 2,352 bytes; CD-DA 2,352 bytes | |||
| Access Times (typical) | Random | < 120 ms | ||
| Full Stroke | < 200 ms | |||
| Data Transfer Rates | Sustained | CD-R
write1,800 KB/s (12X) CD-R write2400 KB/s (16X) CD-RW write (1-4X media) 600 KB/s (4X) CD-RW write (4-10X media) 1,500 KB/s (10X) CD-RW write (4-12X media) 1,800 KB/s (12X) CD-RW read3,600 KB/s (24X) Digital audio extraction (minimum) 7,200 KB/s (48X) | ||
| Variable | CD-RW
write2,400 to 3,600 KB/s (16X to 24X) CD-RW write2,400 to 4,800 KB/s (16X to 32X) CD-RW write2,400 to 6,000 KB/s (16X to 40X) CD-RW write2,400 to 7,200 KB/s (16X to 48X) CD-ROM, CD-R read1,500 to 7,200 KB/s (10X to 48X) | |||
| Data Transfer Modes | ATA
PIO mode 4 (16.7MB/s); ATA multi-word DMA mode 2 (16.7 MB/s); ATA UltraDMA mode
0 (16.7 MB/s); ATA UltraDMA mode 1 (24 MB/s); ATA UltraDMA mode 2 (33 MB/s) default. | |||
| Cache Buffer | 2 MB (minimum) | |||
| Start-up Time (single) | < 7 seconds typical | |||
| Start-up
Time (multi-session) | < 30 seconds typical | |||
| Stop Time | < 4 seconds | |||
| Power | Source | Four-pin, DC power receptacle | ||
| DC power requirement | 5
VDC ± 5% 100 mV ripple p-p 12 VDC ± 5% 200 mV ripple p-p | |||
| DC current | 5 VCD | <
1A (typical) < 1200 mA (maximum) | ||
| 12 VCD | < 600 mA (typical) < 1.2A (maximum) | |||
| Total
Drive Power (Standby mode) | < 2.5 watt | |||
| Audio Output Level | 0.7 Vrms | |||
| Configuration Jumper Block | Master, slave and cable select modes | |||
| Data Interface Connector | 50-pin IDE interface | |||
| Environmental (all conditions, non-condensing) | Temperature (operating) | Operating 41° F to 122° F (5° C to 50° C) | ||
| Relative Humidity (operating) | 10% to 85% | |||
| Maximum Wet Bulb Temperature (operating) | 84° F (29° C) | |||
| | ||||
| 16X/40X DVD-ROM | Height | 5.25-in, half-height | |
| Interface Type | ATAPI | ||
| Dimensions External, Excluding Bezel (W x H) | 5.88 x 1.71 in (149.5 x 43.5 mm) | ||
| Disc Diameter | 12 cm, 8 cm | ||
| Disc Thickness | 1.2 mm | ||
| Track Pitch | 1.6 µm (CD), 0.74 µm (DVD) | ||
| Disc Center Hole Diameter | 15 mm | ||
| Disc Formats | DVD-ROM (single and dual layer); DVD-video; DVD-R version 1.0 and 2.0; DVD-RW version 1.0 and 1.1; DVD-R multi-border; DVD+RW; DVD+R; CD-ROM Mode 1 and 2; CD-DA; CD-ROM XA Mode 2, Form 1 and 2; CD-extra; CD-text; CD-I Mode 2, Form 1 and 2; CD-I ready; video CD, CD-bridge; PhotoCD (single and multi-session); CD-R; CD-RW | ||
| Disc Capacity | DVD-ROM | 4.7 GB (DVD-5), 8.54 GB (DVD-9), 9.4 GB (DVD-10), 3.95 GB (DVD-R version 1.0), 4.7 GB (DVD-R version 2.0), 4.7 GB (DVD-RW version 1.0 and 1.1), 4.7 GB (DVD+RW), 4.7G (DVD+R) | |
| CD-ROM | 540 MB (Mode 1, 12 cm), 640 MB (Mode 2, 12 cm), 700 MB (80 minimum CD-R and CD-RW), 180 MB (8 cm) | ||
| Block Size (bytes) | DVD-ROM 2048; CD-ROM Mode 0 2352; CD-ROM Mode 1 2352, 2340, 2336, 2048; CD-ROM Mode 2 2352, 2340, 2336, 2048 | ||
| Access
Times (typical reads, including settling) | DVD-ROM Single Layer | < 120 ms | |
| CD-ROM Mode 1 | < 90 ms | ||
| Full Stroke DVD | < 240 ms (seek) | ||
| Full Stroke CD | < 160 ms (seek) | ||
| Maximum Data Transfer Rates | CD-ROM Read | 6000 KB/s (40X) Max | |
| DVD-ROM Read | 21,600 KB/s (16X) Max | ||
| Data Transfer Modes | PIO Mode 4 (16.6 MB/s); Multi-word DMA mode 2 (16.6 MB/s); UltraDMA Mode 3 (44.4 MB/s) | ||
| Power | Source | Four-pin, DC power receptacle | |
| DC Power Requirement | 5 VDC ± 5% 100 mV ripple p-p | ||
| 12 VDC ± 5% 200 mV ripple p-p | |||
| DC Current | 5 VDC <800 mA typical, < 1000 mA maximum | ||
| 12 VDC < 870 mA typical | |||
| Audio Output Level | 0.7 Vrms (typical) | ||
| Configuration Jumper Block | Master, slave, and cable select modes | ||
| Data Interface Connector | 40-pin, shrouded and keyed, flat ribbon | ||
| Environmental (all conditions non-condensing) | Temperature (operating) | 41° to 122° F (5° to 50° C) | |
| Relative Humidity (operating) | 10% to 85% | ||
| Maximum Wet Bulb Temperature (operating) | 86° F (30° C) | ||
| Certifications, Approvals | MMC II support, multi-read certification, Microsoft WHQL certification, ACA AS/NZS 3548 class B, CNS 13438, C.I.S.P.R. Pub 22, TUV or VDE EN60950, EN 55022, EN55024, SEMKO, NEMKO, DEMKO, FIMKO, EN 60825-1, UL 60950, and CSA C22.2 60950-2000. | ||
| | |||
|
|
Technical Specifications - Removable Storage
| 1.44-MB Diskette Drive | Diskette Size | 3.5 in (8.9 cm) | |
| LED Indicators (front panel) | Green | ||
| Read/Write Capacity per diskette (high/low density) | 1.44 MB/720 KB | ||
| Drive Supported | One | ||
| Drive Height | One-third | ||
| Drive Rotation | 300 rpm | ||
| Transfer Rate (high/low) | 500/250 Kb/s | ||
| Bytes/Sector | 512 | ||
| Sectors/Track (high/low) | 18/9 | ||
| Tracks/Side (high/low) | 80/80 | ||
| Access Times | Track-to-Track (high/low) | 3/6 ms | |
| Average (high/low) | 169/94 ms | ||
| Settling Time | 15 ms | ||
| Latency Average | 100 ms | ||
| | |||
| HP Drive Key II | Dimensions (HxWxD) | 0.32 x 0.63 x 2.67 in (0.8 x 1.6 x 6.8 cm) | |
| Storage Capacity | 256 MB | ||
| Weight | 0.05 lb (0.02 kg) | ||
| Transfer Rates | Read |
Capable of 6.0 MB/s sustained read speed in USB 2.0 system | |
| Write | Capable of 6.0 MB/s sustained write speed in USB 2.0 system | ||
| Operating Temperature | 41° to 122° F (5° to 50° C) | ||
| Non-operating Temperature | -22° to 140° F (-30° to 60° C) | ||
| Operating System Support | Microsoft Windows 2000, Windows XP Professional, Windows XP Home. No driver is required for this device. Native support is provided by the operating system. | ||
| Option Kit Contents | HP Drive Key II, documentation | ||
|
|
|||
|
© Copyright 2005 Hewlett-Packard Development Company,
L.P. Microsoft, Windows and Windows NT are registered trademarks or trademarks of Microsoft Corporation in the U.S. and/or other countries. Pentium and the Intel Inside Logo are registered trademarks or trademarks of Intel Corporation in the U.S. and/or other countries. All other product names mentioned herein may be trademarks of their respective companies. The information contained herein is subject to change without notice and is provided "as is" without warranty of any kind. The warranties for HP products are set forth in the express limited warranty statements accompanying such products. Nothing herein should be construed as constituting an additional warranty. HP shall not be liable for technical or editorial errors or omissions contained herein. |