Fujitsu Technology Solutions представляет новую линейку оптимизированных для работы в стойке серверов PRIMERGY на базе процессоров Intel. Успех предыдущих моделей и растущий спрос в самых разных областях применения помогли компании разработать инновационные и высокопроизводительные модели напольных и компактных стоечных серверов. При проектировании серверов с двумя процессорными разъемами PRIMERGY поколения S5 особый упор был сделан на повышение энергоэффективности, надежности, производительности и удобства использования, расширение возможностей виртуализации. Они поступят в продажу в апреле 2009 года — именно тогда начнется новая эпоха развития компании.
Пятикратное улучшение
В новую линейку серверов PRIMERGY входят стоечные серверы RX200 и RX300, а также напольный сервер ТХЗОО. Маркировка S5 указывает на то, что модель принадлежит к пятому поколению серверов. Также «5» соответствует и числу усовершенствований:
• Энергосбережение. КПД блоков питания новых серверов PRIMERGY — не ниже 89%, у отдельных моделей он может достигать 92%. Серию S5 отличает инновационная конструкция Cool-safe ™, обеспечивающая более эффективную вентиляцию корпуса. Увеличение коэффициента площади вентиляционных отверстий за счет перехода с обычной на сотовую панель (с 38,5% до 56%) гарантирует высочайшую производительность процессоров и надежность всех компонентов. Также эти серверы оснащены встроенным контроллером дистанционного управления (iRMC S2) и системой управления потребляемой мощности ServerView Power Management.
• Надежность. Серверы PRIMERGY S5 спроектированы с учетом самых строгих требований к качеству. Такие функции, как поддержка резервных жестких дисков и возможностей «горячего» подключения дисков, блоков питания и вентиляторов обеспечивают большее время продуктивной работы; также есть и уникальная функция «горячего» резервирования памяти. Для снижения шума, вибрации и помех корзины жестких дисков крепятся на упругих подвесах.
• Производительность. Помимо функций, предусмотренных новейшей версией платформы Intel Xeon, новые модели PRIMERGY отличаются повышенной масштабируемостью и возможностями расширения. Обладая большой памятью и дисковой емкостью и имея множество разъемов PCI, эти системы прекрасно справляются с задачами виртуализации. Они поддерживают диски SAS второго поколения, имеющие теоретическую пропускную способность в 6 Гбит/с - вдвое большую, чем у традиционных дисков SAS и SATA.
• Эффективность. Серверы отличаются простотой в обслуживании. Все модульные компоненты (информационная панель, ТРМ, RAID, iRMC S2, жесткие диски, ЛВС) взаимозаменимы и имеют родственные драйверы. Возможность размещения VGA-разъема на передней панели облегчит работу администраторов с клавиатурной панели со встроенным дисплеем. «Карточка системных идентификаторов» содержит штрих-коды и МАС-адреса устройств, упрощая их учет и управление. Увеличенные вентиляторы более эффективно охлаждают сервер, а блок питания соответствует требованиям Агентства по охране окружающей среды. «Зеленая» утилита ServerView Power Management позволяет ограничивать мощность сервера и контролировать расходы. Поддержка загрузки ОС с дисков 1SCSI - стандартная характеристика всех серверов.
• Инновационность. Помимо всего вышесказанного, в новых PRIMERGY реализовано несколько новых
концепций - возможно, не революционных, но упрощающих работу системных администраторов. Например, уникальное решение, обеспечивающее наибольшую пропускную способность ввода-вывода на шине PCI Express. Запатентованная технология ЮОР™ (Intelligent Optimization Of PCI-busses) добивается этого за счет переключения двух шин PCIe x4 второго поколения на одну шину PCIe x8 второго поколения. Другой пример - элементы, за которые компоненты сервера можно взять руками, выкрашены в светло-зеленый цвет - администратор сразу увидит, за какой рычаг можно извлечь диск из шасси. Общая информационная панель и встроенные световые индикаторы предоставляют краткую информацию о текущем состоянии системы и необходимости обслуживания отдельных компонентов.
Технические характеристики:
Mainboard
Mainboard type D 2619
Chipset Intel 5520
Processor quantity and type 1 - 2 x Intel® Xeon® processor 5500 series
Processor options Intel® Xeon® E5502 (2C, 1.86 GHz, SLC: 2 x 256 KB, TLC: 4 MB, Turbo: No, 4.8 GT/s,
Mem bus: 800 MHz, 80 W)
Intel® Xeon® E5504 (4C, 2.00 GHz, SLC: 4 x 256 KB, TLC: 4 MB, Turbo: No, 4.8 GT/s,
Mem bus: 800 MHz, 80 W)
Intel® Xeon® E5506 (4C, 2.13 GHz, SLC: 4 x 256 KB, TLC: 4 MB, Turbo: No, 4.8 GT/s,
Mem bus: 800 MHz, 80 W)
Intel® Xeon® E5520 (4C, 2.26 GHz, SLC: 4 x 256 KB, TLC: 8 MB, Turbo: Yes, 5.86 GT/s,
Mem bus: 1066 MHz, 80 W)
Intel® Xeon® E5540 (4C, 2.53 GHz, SLC: 4 x 256 KB, TLC: 8 MB, Turbo: Yes, 5.86 GT/s,
Mem bus: 1066 MHz, 80 W)
Intel® Xeon® L5506 (4C, 2.13 GHz, SLC: 4 x 256 KB, TLC: 4 MB, Turbo: No, 4.8 GT/s,
Mem bus: 800 MHz, 60 W)
Intel® Xeon® L5520 (4C, 2.26 GHz, SLC: 4 x 256 KB, TLC: 8 MB, Turbo: Yes, 5.86 GT/s,
Mem bus: 1066 MHz, 60 W)
Intel® Xeon® X5550 (4C, 2.67 GHz, SLC: 4 x 256 KB, TLC: 8 MB, Turbo: Yes, 6.4 GT/s,
Mem bus: 1333 MHz, 95 W)
Intel® Xeon® X5570 (4C, 2.93 GHz, SLC: 4 x 256 KB, TLC: 8 MB, Turbo: Yes, 6.4 GT/s,
Mem bus: 1333 MHz, 95 W)
Memory slots 18 (9 DIMMs per CPU, 3 channels with 3 slots per channel)
Memory slot type DIMM (DDR3) registered
Memory capacity (min. - max.) 2 GB - 144 GB
Memory Protection Advanced ECC
Memory Scrubbing
SDDC (Chipkill™)
Hot-spare memory support
Memory Mirroring support
Memory notes max. 144 GB registered,; min. 2 GB registered;
Memory Mirroring with 2 identical modules, Hot-spare Memory with three identical
modules per channel
Memory Modules Independent
Mode
2 GB (1 module(s) with 2 GB), DDR3-SDRAM, registered, ECC, 1066 MHz, PC3-8500
2 GB (1 module(s) with 2 GB), DDR3-SDRAM, registered, ECC, 1333 MHz, PC3-10600
4 GB (1 module(s) with 4 GB), DDR3-SDRAM, registered, ECC, 1066 MHz, PC3-8500
4 GB (1 module(s) with 4 GB), DDR3-SDRAM, registered, ECC, 1333 MHz, PC3-10600
8 GB (1 module(s) with 8 GB), DDR3-SDRAM, registered, ECC, 1066 MHz, PC3-8500
8 GB (1 module(s) with 8 GB), DDR3-SDRAM, registered, ECC, 1333 MHz, PC3-10600
Memory Modules Mirrored
Mode
4 GB (2 module(s) with 2 GB), DDR3-SDRAM, registered, ECC, 1066 MHz, PC3-8500
4 GB (2 module(s) with 2 GB), DDR3-SDRAM, registered, ECC, 1333 MHz, PC3-10600
8 GB (2 module(s) with 4 GB), DDR3-SDRAM, registered, ECC, 1066 MHz, PC3-8500
8 GB (2 module(s) with 4 GB), DDR3-SDRAM, registered, ECC, 1333 MHz, PC3-10600
16 GB (2 module(s) with 8 GB), DDR3-SDRAM, registered, ECC, 1066 MHz, PC3-8500
16 GB (2 module(s) with 8 GB), DDR3-SDRAM, registered, ECC, 1333 MHz, PC3-10600
Memory Modules Spare Mode 6 GB (3 module(s) with 2 GB), DDR3-SDRAM, registered, ECC, 1066 MHz, PC3-8500
6 GB (3 module(s) with 2 GB), DDR3-SDRAM, registered, ECC, 1333 MHz, PC3-10600
12 GB (3 module(s) with 4 GB), DDR3-SDRAM, registered, ECC, 1066 MHz, PC3-8500
12 GB (3 module(s) with 4 GB), DDR3-SDRAM, registered, ECC, 1333 MHz, PC3-10600
24 GB (3 module(s) with 8 GB), DDR3-SDRAM, registered, ECC, 1066 MHz, PC3-8500
24 GB (3 module(s) with 8 GB), DDR3-SDRAM, registered, ECC, 1333 MHz, PC3-10600
Interfaces
USB ports 10 x USB 2.0 (3x front, 4x rear, 2x internal for backup devices plus 1x USB stick)
Graphics (15-pin) 2 x VGA (thereof 1x front optional)
Serial 1 (9-pin) 1 x serial RS-232-C, usable for iRMC S2 or system or shared
Serial 2 (9-pin) 1 x serial RS-232-C
LAN / Ethernet (RJ-45) 2 x Gbit/s Ethernet
Service LAN (RJ45) 1 x dedicated service LAN port for iRMC S2 (10/100 Mbit/s)
Service LAN traffic can be switched to shared onbord Gbit LAN port
Onboard or integrated Controller
RAID Controller Integrated RAID 0/1 or RAID 5/6 controller for SAS base units (occupies one PCIe slot).
See under Components RAID controller
SATA Controller ICH10B, 2 x SATA channel for DVD
LAN Controller Intel® 82575EB , 2 x 10/100/1000 Mbit/s Ethernet (TCP/IP acceleration), PXE-Boot via
LAN from PXE server, iSCSI boot (also diskless) via onboard LAN
Remote Management Controller Integrated Remote Management Controller (iRMC S2, 32 MB attached memory incl.
graphics controller), IPMI 2.0 compatible
Trusted Platform Module (TPM) Infineon / separate module; TCG V1.2 compliant (option)
Slots
PCI-Express Gen2 x4 5 x full height from 4 PCIe slots each two wired x4 slots can be combined to one wired
x8 slot
one PCIe-2 slot is occupied with one of two possible modular RAID controllers
PCI-Express Gen2 x8 2 x full height
Slot Notes slot 5 and 7 are notched at the right side and thus also usable for x16 cards (operating
x8, slot 5 only if neighbor slot is empty)
Drive bays
Hard disk bay configuration 6x 3,5-inch, for SAS / SATA or 12x 2,5-inch for SAS/SATA optional
Accessible drive bays 3 x 5.25/1.6-inch
Notes accessible drives All possible options described in relevant system configurator.
Optional hard disk bays 2 x 3.5-inch hot-plug SAS/SATA or 8x 2.5-inch hot-plug SAS in HDD box (occupies 2x
5.25-inch bays)
Operating panel
Operating buttons On/off switch
NMI button
Reset button
Operating panel
Status LEDs System status (amber / yellow)
Identification (blue)
Hard disks access (green)
Power (amber / green)
At system rear side:
System status (amber / yellow)
Identification (blue)
LAN connection (green)
LAN speed (green / yellow)
Service display Optional:
ServerView Local Service Panel (LSP)
ServerView Local Service Display (LSD)
BIOS
BIOS features ROM based setup utility
Recovery BIOS
BIOS settings save and restore
Local BIOS update from USB device
Online update tools for main Windows and Linux versions
Local and remote update via ServerView Update Manager
SMBIOS V2.4
Remote PXE boot support
Remote iSCSI boot support
Supported operating systems
Supported operating systems Microsoft® Windows Server® 2008
Microsoft® Windows Server® 2003
Novell SUSE Linux Enterprise Server
Red Hat Enterprise Linux
VMware Infrastructure
Note: Support of other Linux derivatives on demand
Operating system release link http://ts.fujitsu.com/software
http://docs.ts.fujitsu.com/dl.aspx?id=a9e600b9-e4cb-4f48-aa41-632f69058421
Server Management
Standard ASR&R
PDA
Option ServerView Deployment Manager (fully functional unlimited version)
ServerView Remote Management
ServerView Integration for Tivoli TEC®, Tivoli NetView, HP OpenView NNM and HP
OpenView
iRMC S2 Advanced Pack
Server Management Notes Regarding Operating System dependencies and product details for ServerView Suite
Software Products see dedicated Product Data sheets.
Dimensions / Weight
Floor-stand (W x D x H) 286 x 745 x 466 mm
Rack (W x D x H) 483 x 748 x 177 mm
Mounting Depth Rack 710 mm
Weight up to 40 kg
Weight notes Weight may vary depending on actual configuration
Rack integration kit Rack integration kit as option
Environmental
Noise emission Measured according to ISO 7779 and declared according to ISO 9296
Sound pressure (LpAm) 35 dB(A) (idle) / 37 dB(A) (operating)
Sound power (LWAd; 1B = 10dB) 5.2 B (idle) / 5.5 B (operating)
Operating ambient temperature 10 - 35°C
Operating relative humidity 10 - 85 % (non condensing)
Electrical values
Power supply configuration 1x 800 W hot-plug power supply plus three 120mm standard fans or 2x 800W hot-plug
power supply plus three hot-plug and redundant double fans
Max. output of power supply 800 W
Rated voltage range 100 - 240 V
Rated frequency range 50 - 60 Hz
Electrical values
Rated current max. 100 V - 240 V / 9,0 A – 5,0 A
Rated current in basic
configuration
100 V - 240 V / 4,4 A - 1,5 A
Active Power max. (per system
unit)
560 W
Apparent power max. (per
system unit)
570 VA
Heat emission 2016.0 kJ/h (1911.3 BTU)
Compliance
Germany TÜV GS
Europe CE
USA/Canada CSAc/us
FCC Class A
Global CB
RoHS (Restriction of hazardous substances)
WEEE (Waste electrical and electronical equipment)
Japan VCCI class A
Australia&New Zealand C-Tick
Taiwan CNS 13438 class A
Compliance notes There is general compliance with the safety requirements of all European countries and
North America. National approvals required in order to satisfy statutory regulations or for
other reasons can be applied for on request.
Compliance link https://sp.ts.fujitsu.com/sites/certificates/default.aspx
Components
Hard disk drives SSD SATA, 1.5 Gb/s, 50 GB, hot plug, 2.5-inch
SATA, 120 GB, 5400 rpm, hot plug, 2.5-inch
SATA, 3 Gb/s, 750 GB, 7200 rpm, hot plug, 3.5-inch
SATA, 3 Gb/s, 500 GB, 7200 rpm, hot plug, 3.5-inch
SATA, 3 Gb/s, 250 GB, 7200 rpm, hot plug, 3.5-inch
SATA, 3 Gb/s, 1 TB, 7200 rpm, hot plug, 3.5-inch
SAS, 3 Gb/s, 450 GB, 15000 rpm, hot plug, 3.5-inch
SAS, 3 Gb/s, 300 GB, 15000 rpm, hot plug, 3.5-inch
SAS, 3 Gb/s, 146 GB, 15000 rpm, hot plug, 3.5-inch
SAS, 3 Gb/s, 146 GB, 10000 rpm, hot plug, 2.5-inch
SAS, 3 Gb/s, 73 GB, 15000 rpm, hot plug, 3.5-inch
SAS, 3 Gb/s, 73 GB, 15000 rpm, hot plug, 2.5-inch
SAS, 3 Gb/s, 73 GB, 10000 rpm, hot plug, 2.5-inch
SAS, 3 Gb/s, 36 GB, 15000 rpm, hot plug, 2.5-inch
Hard disk notes Mix of 3.5-inch SAS and SATA HDD is possible but required seperate RAID sets
One Gigabyte equals one billion bytes, when referring to hard disk drive capacity.
Accessible capacity may vary, also depending on used software
Tape Drives DDS Gen5, 36 GB , 3 MB/s, half height, USB 2.0
DDS Gen6, 80 GB , 6 MB/s, half height, SCSI U160
DDS Gen6, 80 GB , 6 MB/s, half height, USB 2.0
LTO2HH Ultrium, 200 GB , 24 MB/s, half height, SCSI U160
LTO3HH Ultrium, 400 GB , 60 MB/s, half height, SCSI U320
LTO4HH Ultrium, 800 GB , 120 MB/s, half height, SAS 3Gb/s
RDX Drive, 80 GB, 160 GB, 320 GB , 25 MB/s, half height, USB 2.0
Optical drives Blu-ray combo drive, (2x BD-ROM; 8x DVD; 24x CD), slimline, SATA I
DVD-ROM, (16xDVD; 48xCD), half height, SATA I
DVD Super Multi, (8xDVD/DVD+RW, 6xDVD-RW, 5xDVD-RAM; 24xCD/CD-R, 16xCDRW),
slimline, SATA I
SCSI / SAS Controller SCSI Ctrl 320 MB 1ch int/ext PCIe x1
SAS Ctrl 3 Gb 4 ports int. / 4 ports ext. PCIe x4
RAID Controller RAID 5/6 Ctrl, SAS/SATA 3 Gb, LSI MegaRAID SAS8880E, 8 ports ext.
RAID level: 0, 1, 10, 5, 50, 6, 60, 512 MB Cache, no BBU support (based on LSI 1078)
Integrated RAID 5/6 Ctrl, SAS/SATA 3 Gb, 8 ports int.
RAID level: 0, 1, 10, 5, 50, 6, 60, 512 MB Cache, optional BBU (based on LSI 1078)
Integrated RAID 5/6 Ctrl, SAS/SATA 3 Gb, 8 ports int.
RAID level: 0, 1, 10, 5, 50, 6, 60, 256 MB Cache, optional BBU (based on LSI 1078)
Integrated RAID 0/1 Ctrl, SAS/SATA 3 Gb, 8 ports int.
RAID level: 0, 1, 1E, no BBU support (based on LSI 1068e)
Integrated RAID 0/1 Ctrl, SAS/SATA 3 Gb, 4 port int.
RAID level: 0, 1, 1E, no BBU support , for internal SAS tapes (based on LSI 1064e)
Fibre Channel controller Fibre Channel Ctrl 1 x 4 Gb Emulex LPe1150 MMF LC
Fibre Channel Ctrl 2 x 4 Gb Emulex LPe11002 MMF LC
Fibre Channel Ctrl 1 x 4 Gb Qlogic QLE2460 MMF LC
Fibre Channel Ctrl 2 x 4 Gb Qlogic QLE2462 MMF LC
Fibre Channel Ctrl 2 x 8 Gb Emulex LPe12002 MMF LC
Fibre Channel Ctrl 1 x 8 Gb Emulex LPe1250 MMF LC
LAN Controller Ethernet Ctrl 1 x 1 Gb Intel® Gigabit CT Desktop Adapter
Ethernet Ctrl 1 x 1 Gb Intel® PRO/1000 PF Server Adapter
Ethernet Ctrl 1 x 1 Gb Intel® PRO/1000 PT Server Adapter
Ethernet Ctrl 2 x 10 Gb Intel® 10 Gigabit XF SR Dual Port Server Adapter
Ethernet Ctrl 2 x 1 Gb Intel® PRO/1000 PT Dual Port Server Adapter
Ethernet Ctrl 4 x 1 Gb Intel® PRO/1000 PT Quad Port Server Adapter
Rack infrastructure Cable Arm 2U for 3rd party racks
Rackmount kit full extraction (820mm), tool less mounting
Cable Management for 19-inch DataCenter / PRIMECENTER Racks
Warranty
Standard Warranty 3 years
Service level On-site Service
Maintenance and Support Services - the perfect extension
Recommended Service 7x24, Onsite Response Time: 4h