Supermicro SYS-5026Ti-BTRF

Key Features
 

Four hot-pluggable systems (nodes) in a 2U form factor. Each node supports the following:

1. Intel® Xeon® X3400 / L3400 series,
    Core™ i3 & Pretium® processors
    with LGA 1156 socket

2. Up to 32GB DDR3 1333/1066/800MHz
    ECC Registered DIMM or 16GB
    Unbuffered DIMM

3. 1 (x16) PCI-E 2.0 (Low Profile)

4. Integrated IPMI 2.0 with KVM and
    Dedicated LAN

5. Dual Intel® 82574L Gigabit Ethernet
    Controllers

6. 3x Hot-swap SATA Drive Bays

7. 920W Platinum-Level High-efficiency
    Redundant Power Supply

Product SKUs SYS-5026Ti-BTRF SuperServer 5026Ti-BTRF (Black)   Motherboard 4x Super X8SIT-F   Processor/Cache CPU LGA 1156 Socket Intel® Xeon® X3400 series Intel® Xeon® L3400 series Intel® Core™ i3 Intel® Pentium® G6950 Intel® Celeron® G1101   System Memory Memory Capacity 6x 240-pin DDR3 DIMM sockets Supports up to 32 GB DDR3 ECC Registered memory (RDIMM) in 6 DIMM sockets Supports up to 16 GB DDR3 ECC Un-Buffered memory (UDIMM) in 4 DIMM sockets 1333 / 1066 / 800 MHz Dual Core processors of Ci3 and Pentium: support ECC UDIMM only Note: Supports 1-Gb and 2-Gb x8 devices only - Intel 3420 / 3400 Chipset Memory Requirements Memory Type 1333 / 1066 / 800 MHz ECC Registered / ECC Unbuffered DDR3 SDRAM 72-bit, 240-pin gold-plated DIMMs DIMM Sizes 1GB, 2GB, 4GB, 8GB Memory Voltage 1.5 V Error Detection Corrects single-bit errors Detects double-bit errors (using ECC memory)   On-Board Devices (per Node) Chipset Intel® 3420 chipset SATA 6x SATA (3 Gbps) RAID 0, 1, 5 support (Windows) RAID 0, 1 support (Linux) IPMI Support for Intelligent Platform Management Interface v.2.0 IPMI 2.0 with virtual media over LAN and KVM-over-LAN support Nuvoton WPCM450 BMC Network Controllers Dual Intel® 82574L Gigabit Ethernet Controllers Supports 10BASE-T, 100BASE-TX, and 1000BASE-T, RJ45 output 1x Realtek RTL8201N PHY (dedicated IPMI) VGA Matrox G200eW 16MB DDR2 Super I/O Nuvoton W83627DHG UBE   Input / Output (per Node) Serial ATA Six Serial ATA ports 3 SATA hard drives supported LAN 2x RJ45 LAN ports 1x RJ45 Dedicated IPMI LAN port USB 2x USB rear ports 1x USB on-board 2x USB internal header (4 ports) Total 7 USB 2.0 Compliant VGA 1x VGA Port Serial Port 1 Fast UART 16550 serial port   System BIOS (per Node) BIOS Type 32Mb SPI Flash EEPROM with AMI® BIOS BIOS Features Plug and Play (PnP) PCI 2.2 ACPI up to 3.0 USB Keyboard support Chassis Form Factor 2U Rackmount Model CSE-827H-R920B   Dimensions Height 3.5" (89mm) Width 17.2" (437mm) Depth 28.5" (724mm) Gross Weight 85 lbs (38.6kg) Available Colors Black   Front Panel (per Node) Buttons Power On/Off button UID button LEDs Power LED (on power button) Network activity LED System Overheat/fan fail/power fail/ LED UID LED (on UID button)   Expansion Slots (per Node) PCI-Express 1 (x16) PCI-E 2.0 (Low Profile)   Drive Bays (per Node) Hot-swap 3x 3.5" SATA Hot-swap drive bays   Hard drive Backplane 2U Hard drive Backplane   System Cooling Fans 4x Cooling Fans   Power Supply with Power Distributor 920W high-efficiency (94%+) AC-DC Redundant power supplies with PMBus and I2C AC Input 100-240 V, 50-60 Hz, 11-4.5 Amp DC Output   4 Amp @ +5V standby   75 Amp @ +12V With Power Distributor +5V: 50 Amp +3.3V: 30 Amp -12V: 0.6 Amp   PC Health Monitoring CPU Monitors for CPU Cores, +1.8V, +3.3V, +5V, ±12V, +3.3V Standby, +5V Standby, VBAT, HT, Memory, Chipset Voltages. 5-Phase-switching voltage regulator with auto-sense from 0.8375V-1.60V FAN Total of 5 fan headers supporting up to 5 fans Five 4-pin fan headers 5x fans with tachometer status monitoring Status monitor for speed control Status monitor for on/off control Support 3-pin fans (w/o speed control) Low noise fan speed control Pulse Width Modulated (PWM) fan connectors Temperature Monitoring for CPU and chassis environment CPU thermal trip support FC temperature sensing logic Thermal Monitor 2 (TM2) support PECI LED CPU / System Overheat LED +5V Standby alert LED Other Features Chassis intrusion detection Chassis intrusion header   Operating Environment / Compliance RoHS   RoHS Compliant Environmental Spec. Operating Temperature: 10°to 35°C (50°to 95°F) Non-operating Temperature: -40°to 70°C (-40°to 158°F) Operating Relative Humidity: 8% to 90% (non-condensing) Non-operating Relative Humidity: 5 to 95% (non-condensing)

Parts List - (Items Included)   Part Number Qty Description Motherboard / Chassis MBD-X8SIT-F   CSE-827H-R920B 4   1 Super X8SIT-F Motherboard   2U Black Chassis Adapter BPN-827ADP-X8 4 Hot-swap adapter Backplane BPN-SAS-827B 1 Sup 12x3.5ö SAS/SATA HDD;hot swap Cable 1 CBL-0317L 4 SATA SET OF 3-17/20S-S/20S-RA CM ROUND (2U Twin^2 Hot Swap) Cable 2 CBL-0318L 4 FRONT CTRL CABLE ROUND 16 TO 16 PIN RIBBON 27CM Cable 3 CBL-0319L 4 2 PIN TO 2 PIN CABLE, 5CM Cable 4 CBL-0320L 4 4 PIN FAN CABLE FOR 2U TWIN SERVER (15+18 CM) Cable 5 CBL-0321L 4 4PIN TO 4PIN I2C CABLE, 17CM CD CDR-X8-UP 1 DRIVER CD FOR X8 UP MOTHERBOARD Power Distributor PDB-PT827-S2488 1 SC827 24PIN SPECIAL OUTPUT POWER DISTRIBUTOR Power Supply PWS-920P-1R 2 1U REDUNDANT 920W PMBus 94% EFFICIENCY Riser Card RSC-R1U-E16R 4 RSC-R1U-E16R Heatsink / Retention SNK-P0046P 4 1U PASSIVE CPU HS FOR INTEL LGA1156 Drive Tray(s) MCP-220-00024-0B 12 Hot-swappable Hard Drive Tray