Supermicro SYS-1016I-M6F - 1U, 1*LGA1156 Xeon34**/Core i3, 6*DDR3 ECC, 8*2.5"HDD, SAS2, IPMI, 560W

Основные характеристики

Cost effective, energy efficient and short depth with 2.5" Hard Drive Solutions

1. Intel® Xeon® X3400 / L3400 series
    processors

2. Up to 32GB DDR3 1333/1066/800MHz
    ECC Registered DIMM / 16GB
    Unbuffered DIMM

3. 1 (x8) PCI-Express 2.0 (Using x8 slot)

4. Dual Intel® 82574L Gigabit Ethernet
    Controller

5. On board Winbond® integrated
    Graphics

6. 8 x 2.5" Hot-swap SAS 6Gbps
    Drive Trays

7. 560W 85%+ High-efficiency Power Supply

8. Integrated IPMI2.0 with Dedicated LAN

Product SKUs
SYS-1016I-M6F	SuperServer 1016I-M6F (Black)

Motherboard

Super X8SI6-F

Processor/Cache
CPU	LGA 1156 Socket Intel® Xeon® X3400 series Intel® Xeon® L3400 series Intel® Core™ i3 Intel® Pentium® G6950 Intel® Celeron® G1101

System Memory
Memory Capacity	6x 240-pin DDR3 DIMM sockets Supports up to 48 GB DDR3 ECC Registered memory (RDIMM) in 6 DIMM sockets Supports up to 16 GB DDR3 ECC Un-Buffered memory (UDIMM) in 4 DIMM sockets 1333 / 1066 / 800 MHz Dual Core processors of Ci3 and Pentium: support ECC UDIMM only Note: Supports 1-Gb and 2-Gb x8 devices only - Intel 3420 / 3400 Chipset Memory Requirements
Memory Type	1333 / 1066 / 800 MHz ECC Registered / ECC Unbuffered DDR3 SDRAM 72-bit, 240-pin gold-plated DIMMs
DIMM Sizes	1GB, 2GB, 4GB, 8GB
Memory Voltage	1.5 V
Error Detection	Corrects single-bit errors Detects double-bit errors (using ECC memory)

On-Board Devices
Chipset	Intel® 3420 chipset
SAS	6Gbps LSI 2008 RAID 0, 1, 10 support (Optional: AOC-SAS2-RAID5-KEY) RAID 5 support
IPMI	Support for Intelligent Platform Management Interface v.2.0 IPMI 2.0 with virtual media over LAN and KVM-over-LAN support Nuvoton WPCM450 BMC
Network Controllers	2x Intel® 82574L Gigabit Ethernet Controllers Supports 10BASE-T, 100BASE-TX, and 1000BASE-T, RJ45 output 1x Realtek RTL8201N PHY (dedicated IPMI)
VGA	Matrox G200eW 16MB DDR2
Super I/O	Winbond 83627DHG-P
Clock Generator	CK505

Expansion Slots
PCI-Express	1 (x8) PCI-E 2.0 slot via riser card

Input / Output
SAS	8x 2.5" 6Gbps SAS
Serial ATA	4 SATA hard drives supported
LAN	2x RJ45 LAN ports 1x RJ45 Dedicated IPMI LAN port
USB	2x USB rear ports 2x USB on-board 2x USB internal header (4 ports) Total 8 USB 2.0 Compliant
VGA	1x VGA port
Keyboard / Mouse	PS/2 keyboard and mouse ports
Serial Port / Header	1x Fast UART 16550 serial port 1x internal header

System BIOS
BIOS Type	32Mb SPI Flash EEPROM with AMI BIOS
BIOS Features	DMI 2.3 PCI 2.2 ACPI 1.0 / 2.0 USB Keyboard support SMBIOS 2.3

Chassis
Form Factor	1U Rackmount
Model	CSE-113MTQ-560CB

Dimensions
Height	1.7" (43mm)
Width	17.2" (437mm)
Depth	19.98" (508mm)
Packaging	24" (W) x 8.5" (H) x 30" (L)
Weight	Net Weight: 18.5 lbs (8.4kg) Gross Weight: 29.5 lbs (13.4kg)
Available Color	Black

Front Panel
Buttons	Power On/Off button System Reset button
LEDs	Power status LED HDD activity LED 2x Network activity LEDs

Drive Bays
Hot-swap	8x 2.5" Hot-swap SAS / SATA drive bays

SAS / SATA Backplane

1x SAS / SATA Backplane

System Cooling
Fans	4x 40x28mm high-efficiency fans 6x fans maximum

Power Supply
560W AC to DC power supply w/ PFC
AC Voltage	100-240 V, 50-60 Hz, 6.5-2.6 Amp
+5V	15 Amp
+5V standby	2 Amp
+12V	46.5 Amp
-12V	0.5 Amp
+3.3V	15 Amp
Certification	80 PLUS Silver Certified   [ Test Report ]

PC Health Monitoring
CPU	Monitors for CPU Cores, +1.8V, +3.3V, +5V, ±12V, +3.3V Standby, +5V Standby, VBAT, HT, Memory, Chipset Voltages. 5-Phase-switching voltage regulator with auto-sense from 0.8375V-1.60V
FAN	Total of 5 fan headers supporting up to 5 fans Five 4-pin fan headers 5x fans with tachometer status monitoring Status monitor for speed control Status monitor for on/off control Support 3-pin fans (w/o speed control) Low noise fan speed control Pulse Width Modulated (PWM) fan connectors
Temperature	Monitoring for CPU and chassis environment CPU thermal trip support FC temperature sensing logic Thermal Monitor 2 (TM2) support PECI
LED	CPU / System Overheat LED +5V Standby alert LED
Other Features	Chassis intrusion detection Chassis intrusion header

Operating Environment / Compliance
RoHS	RoHS Compliant 6/6, Pb Free
Environmental Spec.	Operating Temperature: 10°to 35°C (50°to 95°F) Non-operating Temperature: -40°to 70°C (-40°to 158°F) Operating Relative Humidity: 8% to 90% (non-condensing) Non-operating Relative Humidity: 5 to 95% (non-condensing)

	Parts List - (Items Included)   Part Number Qty Description Motherboard / Chassis MBD-X8SI6-F CSE-113MTQ-560CB 1 1 Super X8SI6-F Motherboard 1U Chassis Backplane BPN-SAS-113TQ 1 Sup 8x2.5" Hot-swap SAS/SATA hdd; SATA con Cable 1 CBL-0118L-02 1 IPASS TO 4 SATA 23CM PBF Cable 2 CBL-0287L 1 IPASS TO 4 SATA 43/43/33/33CM RA, W/ SB,PBF Cable 3 CBL-0341L 1 70CM, INTERNAL USB CABLE FOR SLIM USB DVD ROM Peripheral Drive 1 *** CDM-USATA-G-O-P 1 mini-SATA to USB adapter for slim DVD Peripheral Drive 2 *** DVM-PNSC-DVD-SBT 1 Black slim SATA DVD, Panasonic Peripheral Drive 3 *** DVM-TEAC-DVD-SBT 1 Black slim SATA DVD, TEAC CD CDR-X8-UP 1 DRIVER CD FOR X8 UP MOTHERBOARD Riser Card RSC-RR1U-E16 1 RSC-RR1U-E16 with PIC-E x16 output Heatsink / Retention SNK-P0046P 1 1U PASSIVE CPU HS FOR INTEL LGA1156 Power Supply PWS-562-1H 1 560W MULTIPLE OUTPUT W/HARNESS STD 24PIN Cable 4 CBL-0335L 1 FRONT CTL CABLE 20 PIN TO 20 PIN W/TUBE,70CM,PBF Fan 1 FAN-0065L4 4 4028mm 13K RPM 4-PIN PWM FAN for SC813MF, SC113M Drive Tray(s) MCP-220-00047-0B 8 Black hot swap 2.5" SAS/SATA HDD tray Mounting Rails CSE-PT52L 1 Sliver chassis rail set for SC813M,515,113M
	Note:  *** Only 1 drive is included, these items (***) are interchangeable