Supermicro SYS-1016T-M3FB - 1U, 1*LGA1366 Xeon55**, 6*DDR3 ECC/nonECC, 8*2.5"HDD, SAS, IPMI, 560W

Основные характеристики

Cost effective, energy efficient and short depth with 2.5" Hard Drive Solutions

1. Intel® Xeon® 5600/5500 series
    (QPI up to 6.4 GT/s)

2. Up to 24GB DDR3 1333, 1066 & 800
    ECC / non-ECC Un-Buffered DIMM

3. 1 (x16) PCI-Express 2.0

4. Dual Intel® 82574L Gigabit Ethernet
    Controller

5. On board Winbond® integrated
    Graphics

6. 8 x 2.5" Hot-swap SAS Drive Trays

7. 560W 85%+ High-efficiency Power Supply

8. Integrated IPMI2.0 with Dedicated LAN

Product SKUs
SYS-1016T-M3FB	SuperServer 1016T-M3FB (Black)

Motherboard

Super X8STi-3F

Processor/Cache
CPU	LGA 1366 Socket Intel® Xeon®Processor 5600 Series (Westmere) Intel® Xeon®Processor 5500 Series (Nehalem-EP) NOTE: Intel Xeon® 3500 Series and Core™ i7 are Not Supported (Max TDP > 100 Watts)
System Bus	QPI (up to 6.4 GT/s)

System Memory
Memory Capacity	Supports up to 24 GB 1333 / 1066 / 800MHz DDR3 ECC / non-ECC Un-Buffered memory Three Channel memory bus 6 DIMM sockets
Memory Type	1333 / 1066 / 800MHz Un- Buffered ECC / non-ECC DDR3 SDRAM 72-bit, 240-pin gold-plated DIMMs
DIMM Sizes	256MB, 512MB, 1GB, 2GB, 4GB
Memory Voltage	1.5 V
Error Detection	Corrects single-bit errors Detects double-bit errors (using ECC memory) Supports Intel® x4 and x8 Single Device Data Correction (SDDC)

On-Board Devices
Chipset	Intel® X58 Express chipset ICH10R
SAS	LSI SAS1068E RAID 0, 1, 10 support (Optional: AOC-IButton68) RAID 5 support
SATA	Intel ICH10R SATA (3.0Gbps) Controller RAID 0, 1, 5, 10 support
IPMI	Support for Intelligent Platform Management Interface v.2.0 IPMI 2.0 with virtual media over LAN and KVM-over-LAN support Winbond® WPCM450 BMC
Network Controllers	2x Intel® Gigabit Ethernet Controllers Supports 10BASE-T, 100BASE-TX, and 1000BASE-T, RJ45 output 1x Realtek RTL8201N PHY (dedicated IPMI)
VGA	Integrated Graphics
Super I/O	Winbond 83627DHG chip
Clock Generator	CK505

Expansion Slots
PCI-Express	1 (x16) PCI-e 2.0 slot via riser card

Input / Output
SAS	8 SAS / SATA ports
Serial ATA	Six SATA ports Six SATA hard drives supported
Floppy	1 Floppy controller; 1.44 MB
LAN	2x RJ45 LAN ports
USB	2x USB rear ports 2x USB on-board 2x USB internal header(4 ports) Total 8 USB 2.0 Compliant
VGA	1x VGA port
Keyboard / Mouse	PS/2 keyboard and mouse ports
Serial Port / Header	1x Fast UART 16550 serial port 1x internal header

System BIOS
BIOS Type	4Mb SPI Flash EEPROM with AMI BIOS
BIOS Features	DMI 2.3 PCI 2.2 ACPI 1.0 / 2.0 USB Keyboard support SMBIOS 2.3

Chassis
Form Factor	1U Rackmount
Model	CSE-113MTQ-560CB

Dimensions
Height	1.7" (43mm)
Width	17.2" (437mm)
Depth	19.98" (508mm)
Packaging	24" (W) x 8.5" (H) x 30" (L)
Weight	Net Weight: 18.5 lbs (8.4kg) Gross Weight: 29.5 lbs (13.4kg)
Available Color	Black

Front Panel
Buttons	Power On/Off button System Reset button
LEDs	Power status LED HDD activity LED 2x Network activity LEDs

Expansion Slots
PCI-Express	1 (x16) PCI-E 2.0 slot

Drive Bays
Hot-swap	8x 2.5" Hot-swap SAS / SATA drive bays

SAS / SATA Backplane

1x SAS / SATA Backplane

System Cooling
Fans	4x 40x28mm high-efficiency fans 6x fans maximum

Power Supply
560W AC to DC power supply w/ PFC
AC Voltage	100-240 V, 50-60 Hz, 6.5-2.6 Amp
+5V	15 Amp
+5V standby	2 Amp
+12V	46.5 Amp
-12V	0.5 Amp
+3.3V	15 Amp
Certification	80 PLUS Silver Certified   [ Test Report ]

PC Health Monitoring
CPU	Monitors for CPU Cores, +1.8V, +3.3V, +5V, ±12V, +3.3V Standby, +5V Standby, VBAT, HT, Memory, Chipset Voltages. 6-Phase-switching voltage regulator with auto-sense from 0.8375V-1.60V
FAN	Total of six fan headers supporting up to 6 fans Six 4-pin fan headers 6x fans with tachometer status monitoring Status monitor for speed control Status monitor for on/off control Support 3-pin fans (w/o speed control) Low noise fan speed control Pulse Width Modulated (PWM) fan connectors
Temperature	Monitoring for CPU and chassis environment CPU thermal trip support FC temperature sensing logic Thermal Monitor 2 (TM2) support PECI
LED	CPU / System Overheat LED +5V Standby alert LED
Other Features	Chassis intrusion detection Chassis intrusion header

Operating Environment / Compliance
RoHS	RoHS Compliant 6/6, Pb Free
Environmental Spec.	Operating Temperature: 10°to 35°C (50°to 95°F) Non-operating Temperature: -40°to 70°C (-40°to 158°F) Operating Relative Humidity: 8% to 90% (non-condensing) Non-operating Relative Humidity: 5 to 95% (non-condensing)

	Parts List - (Items Included)   Part Number Qty Description Motherboard / Chassis MBD-X8STi-3F-O-P CSE-113MTQ-560CB 1 1 Super X8STi-3F Motherboard 1U Chassis (B = Black) Air Shroud MCP-310-18009-0U 1 1U Air Shroud Backplane BPN-SAS-113TQ 1 Sup 8x2.5" Hot-swap SAS/SATA hdd; SATA con Cable 1 CBL-0157L 2 8pin to 8pin ribbon cable with tube for SGPIO, 40cm, PBF Cable 2 CBL-0190L 2 SATA SET OF 4-43/33/26/22CM ROUND S-S, PBF Cable 3 CBL-0206L 1 48CM SATA ROUND S-S PBF Cable 4 CBL-0230L 1 65CM SATA ROUND S-RA PBF CD CDR-X8-UP 1 DRIVER CD FOR X8 UP MOTHERBOARD Riser Card RSC-RR1U-E16 1 RSC-RR1U-E16 with PIC-E x16 output Heatsink / Retention SNK-P0036 1 1U PASSIVE CPU HS FOR INTEL LGA1366 X8 UP MB Power Supply PWS-562-1H 1 560W MULTIPLE OUTPUT W/HARNESS STD 24PIN Cable 5 CBL-0335L 1 FRONT CTL CABLE 20 PIN TO 20 PIN W/TUBE,70CM,PBF Fan 1 FAN-0065L4 4 4028mm 13K RPM 4-PIN PWM FAN for SC813MF, SC113M Mounting Rails CSE-PT52L 1 Sliver chassis rail set for SC813M,515,113M Drive Tray(s) MCP-220-00047-0B 8 Hot-swappable Hard Drive Tray (B = Black)