Основные характеристики
1. Quad AMD® Opteron™ Support,
(Dual Core Ready)
1000 MHz HyperTransport Link
2. Up to 32GB DDR400 SDRAM (or)
Up to 64GB DDR333 SDRAM (or)
Up to 64GB DDR266 SDRAM
3. 1 PCI-e x8 Slot,
1 PCI-e x8 or Hypertransport Slot,
2 PCI-X 133/100MHz Slots,
2 PCI-X 100MHz Slots
4. nVidia® nForce Pro 2200 (CK804)
AMD8132 Chipset
5. 5 x 3.5" Hot-swap SCSI Drive Bays
6. Dual Gigabit (Intel 82546GB)
Ethernet Controller
7. 1000W Redundant Power Supply
|
|
| AS-4040C-8R |
- A+ Server 4040C-8R (Beige)
|
| AS-4040C-8RB |
- A+ Server 4040C-8RB (Black)
|
|
|
| CPU |
- Quad 940-pin ZIF Sockets
- Supports four Dual-Core AMD Opteron™ 800 Series processor(s)
- HyperTransport Link (1000MHz)
- 8-way option has 2 HyperTransports using PCI-e, extra I/O or Pathscale communication device
- Only Quad-Processor Configurations Recommended
- VRM x4
|
| Chipset |
- nVidia nForce Pro 2200 (CK804)
- AMD 8132 PCI-X Tunnel
|
|
|
| Memory Capacity |
- Four 184-pin DIMM sockets per processor memory bank
- Four memory banks for 4 processors (Quad).
- Supports up to 32 GB DDR 400 MHz memory or
- Supports up to 64 GB DDR 333/266 MHz memory
- Supports up to 64 GB registered ECC DDR for 4-way option
- Supports up to 128 GB memory for 8-way option only
- Single or Dual (recommended) channel memory support
- Recommended that memory be populated equally in adjacent memory banks
|
| Memory Type |
- DDR 400/333/266MHz buffered (registered) ECC SDRAM 72-bit, 184-pin gold-plated DIMMs
|
| DIMM Sizes |
- 256 MB, 512 MB, 1GB, 2GB, 4GB**
|
| Memory Voltage |
|
| Error Detection |
- Corrects single-bit errors
- Detects double-bit errors
(using ECC memory)
|
|
|
| SCSI |
- Dual-Channel Ultra320 SCSI
- Adaptec AIC-7902 Controller
|
| ZCR |
- Supports Supermicro All-In-One Zero Channel RAID card AOC-LPZCR1 (or)
- RAID 0, 1, 10, JBOD
|
| SATA |
- nVidia nForce Pro 2200 SATA 3.0Gbps Controller
- 4 SATA Ports
- nVidia RAID 2.0
- SATA RAID 0, 1, 0+1 support
|
| Network Controllers |
- Dual Intel 82546GB Ethernet Controllers
- Supports 10BASE-T, 100BASE-TX, and 1000BASE-T, RJ45 output
|
| IPMI |
|
| Graphics |
|
| Super I/O |
|
| Clock Generator |
|
|
|
| Serial ATA |
- Integrated SATA 3.0Gbps Controller
- Four Serial ATA Connectors
- Four SATA hard drives supported
|
| IDE |
- Dual ATA 133/100 EIDE channels support up to four UDMA IDE devices
- Supports UDMA Mode 5
- Supports PIO Mode 4
- Supports ATA 100 / 133
|
| Floppy |
- 1 Floppy port; 1.44 MB, 2.88 MB support
|
| LAN |
|
| USB |
- FUCI
- Up to 4 USB Ports 2.0 Compliant, 1.1 Compatible
- 2 rear ports
- 1 internal header for 2 ports
|
| VGA |
|
| Keyboard / Mouse |
- PS/2 keyboard and mouse ports
|
| Serial Ports |
- 1 Fast UART 16550 serial port
- 1 Header
|
| Parallel Ports |
- 1 ECP / EPP parallel port
|
|
|
| Form Factor |
- Tower / 4U Rackmountable
- Optional Rackmount Kit (MCP-290-00001-00)
|
| Model |
|
|
|
| Height |
|
| Width |
|
| Depth |
|
| Gross Weight |
|
| Available Colors |
|
|
|
| Buttons |
- Power On/Off button
- System Reset button
|
| LEDs |
- Power LED
- Hard drive activity LED
- 2x Network activity LEDs
- System Overheat / Fan Fail LED
- Power Fail LED
|
| Ports |
|
|
|
| Hot-swap |
- 5 x 3.5" SCA Ultra320/160 Hot-swap Drives
|
| Peripheral Bay(s) |
- 2x 5.25" Peripheral Drive Bay
- 1x 5.25" Bay For Floppy Drive
|
|
|
| HyperTransport |
- 1 HyperTransport slot for Pathscale communication device
|
| PCI-Express |
- 2 PCI-e x8 slots (one using x16 slot)
|
| PCI-X |
- 2 64-bit PCI-X 133/100MHz slots
- 2 64-bit PCI-X 100MHz slots
- Note: Quad Processors are required for correct PCI-X expansion slot operation
|
|
|
| Fans |
- 3x 5000 RPM Hot-Swappable Cooling Fans
- 3x 5000 RPM Hot-Swappable Rear Exhaust Fan
|
|
|
| AC Voltage |
- 100 - 240V, 50 - 60Hz, 15 - 7Amp
|
| +5V standby |
|
| +12V |
|
| +5V |
|
| +3.3V |
|
| -12V |
|
|
|
| CPU |
- Monitors CPU Core Voltages, +3.3V, +5V, ±12V & +3.3V Standby, +5V Standby, HyperTransport voltage 1.2V, memory voltage 2.5V, DDR termination 1.25V, chipset voltage 1.8V
- Up to 8 fan status
- Supports System Management Utility
|
| FAN |
- Total up to 8-fan status
- 3-pin fan speed control or
- 4-pin Pulse Width Modulated (PWM) fan connector
|
| Temperature |
- Monitoring for CPU and chassis environment
|
| LED |
|
| Other Features |
|
|
|
| BIOS Type |
- 8Mb Flash EEPROM with AMI® BIOS
- SST49LF080A
|
| BIOS Features |
- Plug and Play (PnP)
- PCI 2.2
- DMI 2.3
- ACPI 2.0
- BIOS Rescue Hot Keys
- USB Keyboard Support
- SMBIOS 2.3
|
|
|
|
|
|
|
|
| Parts List - (Items Included) |
|
| |
Part Number |
Qty |
Description |
| Motherboard / Chassis |
MBD-H8QC8
CSE-748S-R1000(B) |
1
1 |
Super H8QC8 Motherboard
4U SC748S-R1000 Chassis (B = Black) |
| Backplane |
CSE-SCA-016 |
1 |
SCSI Hard Drive Backplane for CSE-M35S Mobile Rack |
| Cable(s) |
CBL-0051L
CBL-0063L
CBL-0084
CBL-0087
CBL-0209L |
1
1
1
1
3 |
60cm Round Flopopy Cable
20" U320 SCSI Cable
6" 16-pin Fron Control Split Cable
20" 16-pin to 16-pin Round Ribbon Cable
210mm 4-pin to 3-pin Fan Power Cable |
| Drive Bay(s) |
CSE-PT36
CSE-M35S |
2
1 |
5.25" Dummy Tray with Rail
5-Drive Disk Array Mobile Rack |
| Fan(s) |
FAN-0081
FAN-0090 |
3
3 |
5000 RPM Rear Cooling Fan
5000 RPM Housing Fan |
| Heatsink Components |
BKT-0004
BKT-0005 |
4
4 |
Heatsink Mounting Plate
Heatsink Retention |
| I/O Shield |
CSE-PT55 |
1 |
Color I/O Shield with Gasket |
| Peripheral Drives |
FPD-PNSC-02 (01) |
1 |
Panasonic 3.5" 1.44MB Floppy Drive (01 = Black) |
| Power Supply |
PWS-1K01-1R |
2 |
SP1K0-1R 1000W Redundant Power Module |
| Air Shroud |
CSE-PT0125 |
1 |
Air Shroud |
|
|
|
|
| Optional Parts List |
|
| |
Part Number |
Qty |
Description |
| Heatsink / Retention |
SNK-P0013 |
- |
Passive Copper Heatsink for 2U Chassis and above
(Please refer to our Thermal Components Matrix) |
| Mounting Rails |
MCP-290-00001-00 |
- |
SC748 4U Chassis Mounting Rails |
|
|
|
