Supermicro SYS-1025C-M3B

Основные характеристики

1. Dual Intel® 64-bit Xeon® Quad-Core or
    Dual-Core, with 1333 / 1066 MHz FSB

2. Up to 48GB 667/533MHZ DDR2 ECC
   Register SDRAM *

3. 1 (x8) PCI-E Slot

4. Intel® 82573V & 82573L
    Gigabit Ethernet Controller

5. 8 x 2.5" Hot-swap SAS Drive Trays

6. 560W 85%+ High-efficiency Power Supply

Product SKUs
SYS-1025C-M3B	SuperServer 1025C-M3B (Black)

Motherboard

Super X7DCL-3

Processor/Cache
CPU	Dual 771-pin LGA Sockets Supports up to Dual Intel® 64-bit Xeon®processor(s) of the same type below: Quad-Core Intel® Xeon®Processor 5400/5300 sequence (Harpertown /Clovertown processor) up to 3.16 GHz Dual-Core Intel® Xeon®Processor 5200/5100 sequence (Wolfdale/Woodcrest processor) up to 3.40 GHz
System Bus	1333 / 1066 MHz system bus
Operating System Software	Supports 64-bit Operating Systems Supports 32-bit Operating Systems

System Memory
Memory Capacity	Six 240-pin DIMM sockets Supports up to 48GB 667/ 533MHz DDR2 ECC Register Single/Dual Rank memory * Dual channel memory bus Memory must be populated in pairs
Memory Type	667/533MHz Register DDR2 ECC Single/Dual Rank SDRAM 72-bit, 240-pin gold-plated DIMMs *
DIMM Sizes	256MB, 512MB, 1GB, 2GB, 4GB, 8GB**
Memory Voltage	1.8V only
Error Detection	Corrects single-bit errors Detects double-bit errors (using ECC memory) Supports Intel® x4 and x8 Single Device Data Correction (SDDC)

On-Board Devices
Chipset	Intel® 5100 (San Clemente) chipset Intel® ICH9R
SAS	LSI SAS1068E RAID 0, 1, 10 support (Optional: AOC-IButton68) RAID 5 support
SATA	Intel ICH9R SB SATAII Controller RAID 0, 1, 5, 10 support (Windows only) RAID 0, 1, 10 support (Linux)
IPMI	Support for Intelligent Platform Management Interface v.2.0 / 1.5 200-pin IPMI slot (SIMLC) (Optional: AOC-SIMLC) NOTE: KVM-over-LAN supported w/ AOC-SIM1U+ - PCB 1.1A only
Network Controllers	Intel® 82573V & 82573L Gigabit Ethernet Controller Supports 10BASE-T, 100BASE-TX, and 1000BASE-T, RJ45 output
Graphics	XGI Z9 with 32 MB of video memory
Super I/O	Winbond 83627DHG chip
Clock Generator	CK505 chip

Input / Output
SAS	8 SAS / SATA ports
Serial ATA	Six Serial ATA ports Four SATA hard drives supported
IDE	Single EIDE channel supports up to two UDMA IDE devices(IDE-M, IDE-S) including CF card Supports UDMA Mode 5, PIO Mode 4, and ATA/100 Compact Flash (40-pin connector, IDE 1, single channel) slot
Floppy	1 Floppy controller; 1.44 MB, 2.88 MB
LAN	2x RJ45 LAN ports
USB	2x USB rear ports 3x USB internal header 5 total USB ports, 2.0 Compliant / 1.1 Compliant
VGA	1x VGA Port
Keyboard / Mouse	PS/2 keyboard and mouse ports
Serial Port / Header	1 Fast UART 16550 serial port 1 Header

System BIOS
BIOS Type	8Mb Flash EEPROM with Phoenix ® BIOS
BIOS Features	Plug and Play (PnP) DMI 2.3 PCI 2.2 ACPI 1.0/2.0 USB Keyboard support Hardware BIOS Virus protection SMBIOS 2.3

Chassis
Form Factor	1U Rackmount
Model	CSE-113MTQ-560CB

Dimensions
Height	1.7" (43mm)
Width	17.2" (437mm)
Depth	20" (508mm)
Gross Weight	10 lbs (4.5kg)
Available Colors	Black

Front Panel
Buttons	Power On/Off button System Reset button
LEDs	Power status LED HDD activity LED 2x Network activity LEDs

Expansion Slots
PCI-Express	1 (x8) PCI-e slot

Drive Bays
Hot-swap	8x 2.5" Hot-swap SAS / SATA drive bays

SAS / SATA Backplane

1x SAS / SATA Backplane

System Cooling
Fans	4x 40x28mm high-efficiency fans 6x fans maximum

Power Supply
560W AC to DC power supply w/ PFC
AC Voltage	100-240 V, 50-60 Hz, 6.5-2.6 Amp
+5V	15 Amp
+5V standby	2 Amp
+12V	46.5 Amp
-12V	0.5 Amp
+3.3V	15 Amp
Certification	80 PLUS Silver Certified   [ Test Report ]

PC Health Monitoring
CPU	Monitors for CPU Cores,+1.8V, +3.3V, +5V, ±12V, +3.3V Stdby, +5 Stdby, VBAT, HT, Memory, Chipset CPU Core 6-Phase-switching voltage regulator with auto-sense from 0.8375V-1.60V
FAN	Total of eight 4-pin fans 8x fans with tachometer monitoring Status monitor for speed control Status monitor for on/off control Support for 3-pins (w/o speed control) Low noise fan speed control Pulse Width Modulated (PWM) fan connectors
Temperature	Monitoring for CPU and chassis environment CPU thermal trip support Thermal Control for 8x Fan Connectors PSU I2C temperature sensing logic Thermal Monitor 2 (TM2) support PECI
LED	CPU / System Overheat LED Suspend-state Indicator LED
Other Features	Chassis intrusion detection Chassis intrusion header Chipkill Support

Operating Environment / Compliance
RoHS	RoHS Compliant 6/6, Pb Free
Environmental Spec.	Operating Temperature: 10°to 35°C (50°to 95°F) Non-operating Temperature: -40°to 70°C (-40°to 158°F) Operating Relative Humidity: 8% to 90% (non-condensing) Non-operating Relative Humidity: 5 to 95% (non-condensing)

	Parts List - (Items Included)   Part Number Qty Description Motherboard / Chassis MBD-X7DCL-3-O-P CSE-113MTQ-560CB 1 1 Super X7DCL-3 Motherboard 1U Chassis (B = Black) Air Shroud MCP-310-00029-01 1 1U Air Shroud Backplane BPN-SAS-113TQ 1 SAS / SATA Backplane [ Manual ] Cable(s) CBL-0087L CBL-0157L CBL-0190L CBL-0206L 1 1 2 1 16-pin to 16-pin Front Cable 8-Pin to 8-Pin Ribbon Cable For SGPIO SATA Cable Set SATA Cable CD CDR-X7 1 Driver CD Drive Tray(s) MCP-220-00047-0B 8 Hot-swappable Hard Drive Tray (B = Black) Fan(s) FAN-0086L4 4 40x28mm Cooling Fans Heatsink / Retention SNK-P0017 2 Please refer to our Thermal Components Matrix Mounting Rails CSE-PT52 1 SC813M 1U Chassis Mounting Rails Power Supply PWS-562-1H 1 560W High-Efficiency Power Supply Riser Card CSE-RR1U-E8 1 1U PCI-E x8 Riser Card
	Optional Parts List   Part Number Qty Description IPMI AOC-SIMLC AOC-SIM1U+ - - IPMI 2.0 IPMI 2.0 w/ KVM Over LAN

*  PCB 1.1A supports up to 48GB of single / dual rank memory
   PCB 1.1 supports up to 32GB of single rank memory
**This memory modules are not tested yet