Основные характеристики
Four hot-pluggable
1. Intel® Xeon® processor 5600/5500
series, with QPI up to 6.4 GT/s
2. Up to 192GB** DDR3 1333/ 1066/
800MHz ECC Registered DIMM / 48GB
Unbuffered DIMM
3. 1 (x16) PCI-E ( Low Profile)
4. Integrated IPMI 2.0 with KVM and
Dedicated LAN
5. Intel® 82576 Dual-Port Gigabit
Ethernet Controller
6. 3x Hot-swap SATA Drive Bays
7. 1400W Gold-level High-efficiency
Power Supply
|
|
| SYS-6026TT-BTF |
- SuperServer 6026TT-BTF (Black)
|
|
| CPU |
- Dual 1366-pin LGA Sockets
- Supports up to two Intel® 64-bit Xeon® processor(s) of the same type below:
- Intel®
Xeon® Processor X5600/E5600/L5600 Series
(Westmere) 40W - 95W
- Intel®
Xeon® Processor X5500/E5500/L5500 Series
(Nehalem-EP) 38W - 95W
|
| QPI |
|
|
| Memory Capacity |
- 12x 240-pin DIMM sockets
- Supports up to 192 GB** 1333 / 1066 / 800MHz DDR3 ECC Registered memory
- Supports up to 48 GB 1333 / 1066 / 800MHz DDR3 ECC / Non ECC Unbuffered memory
- Memory Mirroring supported
|
| Memory Type |
- 1333 / 1066 / 800MHz ECC Registered / ECC or Non ECC Unbuffered DDR3 SDRAM 72-bit, 240-pin gold-plated DIMMs
|
| DIMM Sizes |
- 1GB, 2GB, 4GB
, 8GB**
, 16GB**
|
| Memory Voltage |
|
| Error Detection |
- Corrects single-bit errors
- Detects double-bit errors (using ECC memory)
- Supports Intel® x4 and x8 Single Device Data Correction (SDDC)
|
|
|
| Chipset |
- Intel® 5500 (Tylersburg) chipset
- ICH10R + IOH-36D
|
| SATA |
- Intel ICH10R SATA 3.0Gbps Controller
- RAID 0, 1, 5, 10 support
|
| IPMI |
- Support for Intelligent Platform Management Interface v.2.0
- IPMI 2.0 with virtual media over LAN and KVM-over-LAN support
- Winbond® WPCM450 BMC
|
| Network Controllers |
- Intel® 82576 Dual-Port Gigabit Ethernet Controller
- Supports 10BASE-T, 100BASE-TX, and 1000BASE-T, RJ45 output
- Intel® I/OAT 3 support for fast, scaleable, and reliable networking
- VMDq support for better performance of virtualization
- 1x Realtek RTL8201N PHY (dedicated IPMI)
|
| Graphics |
|
| Super I/O |
|
| Clock Generator |
|
|
|
| Serial ATA |
- Six Serial ATA ports
- 3 SATA hard drives supported
|
| LAN |
- 2x RJ45 LAN ports
- 1x RJ45 Dedicated IPMI LAN port
|
| USB |
- 2 rear + 1 header (2 Ports)
- 4 total USB ports, 2.0 Compliant / 1.1 Compliant
|
| VGA |
|
| Serial Port |
- 1 Fast UART 16550 serial port
|
|
| BIOS Type |
- 32Mb SPI Flash EEPROM with AMI® BIOS
|
| BIOS Features |
- Plug and Play (PnP)
- PCI 2.2
- ACPI up to 3.0
- USB Keyboard support
|
|
|
|
| Height |
3.5" (89mm) |
| Width |
17.2" (437mm) |
| Depth |
28.5" (724mm) |
| Gross Weight |
85 lbs (38.6kg) |
| Available Colors |
Black |
|
|
| Buttons |
- Power On/Off button
- UID button
|
| LEDs |
- Power LED (on power button)
- UID LED (on UID button)
- Network activity LED
- System Overheat/fan fail/power fail/ LED
|
|
| PCI-Express |
- 1 (x16) PCI-E ( Low Profile)
|
|
|
| Hot-swap |
- 3x 3.5" SATA Hot-swap drive bays
|
|
| AC Input |
- 1100W: 100 - 140V, 50 - 60Hz, 9.5 - 13.5 Amp
- 1400W: 180 - 240V, 50 - 60Hz, 7.0 - 9.5 Amp
|
DC Output
+5V standby |
|
DC Output
+12V |
- 92 Amp @ 100-140V
- 116 Amp @ 180-240V
|
| With Distributor |
- +5V: 30 Amp
- +3.3V: 24 Amp
- -12V: 0.6 Amp
|
| Certification |
80 PLUS Gold Certified
[ Test Report ]
|
|
|
| CPU |
- Monitors for CPU Cores,+1.5V, +3.3V, +5V, +12V, +5 Stdby, +3.3 Stdby, VBAT, Memory Voltages.
- CPU Core 6-Phase-switching voltage regulator
|
| FAN |
- Total of four 4-pin PWM fans
- 4x fans with tachometer monitoring
- Status monitor for speed control
- Status monitor for on/off control
- Low noise fan speed control
|
| Temperature |
- Monitoring for CPU and chassis environment
- CPU thermal trip support
- Thermal Control for 4x Fan Connectors
- PSU I2C temperature sensing logic
- Thermal Monitor 2 (TM2) support
- PECI
|
| LED |
- Power Fail / Overheat LED
- Suspend-state Indicator LED
- UID LED
|
| Other Features |
|
RoHS
|
|
| Environmental Spec. |
- Operating Temperature: 10°to 35°C (50°to 95°F)
- Non-operating Temperature: -40°to 70°C (-40°to 158°F)
- Operating Relative Humidity: 8% to 90% (non-condensing)
- Non-operating Relative Humidity: 5 to 95% (non-condensing)
|
|
|
|
|
|
|
|
| Parts List - (Items Included) |
|
| |
Part Number |
Qty |
Description |
| Motherboard / Chassis |
MBD-X8DTT-F
CSE-827H-R1400B |
4
1 |
Super X8DTT-F Motherboard
2U Black Chassis |
| Air Shroud |
MCP-310-82706-0B |
4 |
2U Air Shroud |
| Adapter |
BPN-827ADP-X8 |
4 |
Hot-swap adapter |
| Backplane |
BPN-SAS-827B |
1 |
Sup 12x3.5Г¶ SAS/SATA HDD;hot swap |
| Cable 1 | CBL-0317L |
4 |
SATA SET OF 3-17/20S-S/20S-RA CM ROUND (2U Twin^2 Hot Swap) |
| Cable 2 | CBL-0318L |
4 |
FRONT CTRL CABLE ROUND 16 TO 16 PIN RIBBON 27CM |
| Cable 3 | CBL-0319L |
4 |
2 PIN TO 2 PIN CABLE, 5CM |
| Cable 4 | CBL-0320L |
4 |
4 PIN FAN CABLE FOR 2U TWIN SERVER (15+18 CM) |
| Cable 5 | CBL-0321L |
4 |
4PIN TO 4PIN I2C CABLE, 17CM |
| CD |
CDR-X8 |
1 |
For X8 series |
| Riser Card |
RSC-R1U-E16R |
4 |
RSC-R1U-E16R |
| Heatsink / Retention |
SNK-P0037P |
8 |
1U PASSIVE CPU HS FOR INTEL LGA1366 (HTP) |
| Power Distributor | PDB-PT827-S2488 |
1 |
SC827 24PIN SPECIAL OUTPUT POWER DISTRIBUTOR |
| Power Supply | PWS-1K41P-1R |
1 |
1400W 1U GOLD LEVEL PWS W/ PM BUS & WX3" |
| Fan 1 | FAN-0111L4 |
4 |
80X38MM 9.5K RPM 4-PIN PWM FAN FOR SC827 |
| Mounting Rails | MCP-290-00053-0N |
1 |
Rail set, quick/quick, default for 2,3U 17.2"W |
| Drive Tray(s) |
MCP-220-00024-0B |
12 |
Hot-swappable Hard Drive Tray |
|
|
|
|
| Optional Parts List |
|
| |
Part Number |
Qty |
Description |
| Power Supply |
PWS-1K41P-1R |
1 |
1400W Gold Level Power Supply for Redundancy |
|
|
|
** Please check 'Tested Memory List' for compatibility |
