Основные характеристики
1. Intel® Xeon® processor 5600/5500
series, with QPI up to 6.4 GT/s
2. Up to 192GB DDR3 1333/ 1066/ 800MHz
ECC Registered DIMM / 48GB
Unbuffered DIMM
3. 1 (x4) PCI-E 2.0 (Low Profile)
2 (x8) PCI-E 2.0 slots
4. Integrated IPMI 2.0 with KVM and
Dedicated LAN
5. Intel® 82576 Dual-Port Gigabit
Ethernet Controller
6. 3x Hot-swap SATA Drive Bays
7. 1400W Gold-level High-efficiency
Power Supply
8. 1x Nvidia Tesla C1060 GPU Card
|
|
| SYS-6016GT-TF-TC1 |
- SuperServer 6016GT-TF-TC1 (Black)
|
|
| CPU |
- Dual 1366-pin LGA Sockets
- Supports up to two Intel® 64-bit Xeon® processor(s) of the same type below:
- Intel®
Xeon® Processor X5600/E5600/L5600 Series
(Westmere) 40W - 130W
- Intel®
Xeon® Processor X5500/E5500/L5500 Series
(Nehalem-EP) 38W - 95W
|
| QPI |
|
|
| Memory Capacity |
- 12x 240-pin DIMM sockets
- Supports up to 192 GB 1333 / 1066 / 800MHz DDR3 ECC Registered memory
- Supports up to 48 GB 1333 / 1066 / 800MHz DDR3 ECC / Non ECC Unbuffered memory
- Memory Mirroring supported
|
| Memory Type |
- 1333 / 1066 / 800MHz ECC Registered / ECC or Non ECC Unbuffered DDR3 SDRAM 72-bit, 240-pin gold-plated DIMMs
|
| DIMM Sizes |
- 1GB, 2GB, 4GB
, 8GB
, 16GB
|
| Memory Voltage |
|
| Error Detection |
- Corrects single-bit errors
- Detects double-bit errors (using ECC memory)
- Supports Intel® x4 and x8 Single Device Data Correction (SDDC)
|
|
|
| GPU |
- 1x Nvidia Tesla C1060 GPU Card
|
| Chipset |
- Intel® 5520 (Tylersburg) chipset
- ICH10R + IOH-36D
|
| SATA |
- Intel ICH10R SATA 3.0Gbps Controller
- RAID 0, 1, 5, 10 support
|
| IPMI |
- Support for Intelligent Platform Management Interface v.2.0
- IPMI 2.0 with virtual media over LAN and KVM-over-LAN support
- Winbond® WPCM450 BMC
|
| Network Controllers |
- Intel® 82576 Dual-Port Gigabit Ethernet Controller
- Supports 10BASE-T, 100BASE-TX, and 1000BASE-T, RJ45 output
- Intel® I/OAT 3 support for fast, scaleable, and reliable networking
- VMDq support for better performance of virtualization
- 1x Realtek RTL8201N PHY (dedicated IPMI)
|
| Graphics |
|
| Super I/O |
|
| Clock Generator |
|
|
|
| Serial ATA |
- Six Serial ATA ports
- Six SATA hard drives supported
|
| LAN |
- 2x RJ45 LAN ports
- 1x RJ45 Dedicated IPMI LAN port
|
| USB |
- 2 rear + 1 header (2 Ports)
- 4 total USB ports, 2.0 Compliant / 1.1 Compliant
|
| VGA |
|
| Serial Port |
- 1 Fast UART 16550 serial port
|
|
| BIOS Type |
- 32Mb SPI Flash EEPROM with AMI® BIOS
|
| BIOS Features |
- Plug and Play (PnP)
- PCI 2.2
- ACPI up to 3.0
- USB Keyboard support
|
|
|
|
| Height |
|
| Width |
|
| Depth |
|
| Gross Weight |
|
| Available Color |
|
|
|
| Buttons |
- Power On/Off button
- System Reset button
|
| LEDs |
- Power LED
- Hard drive activity LED
- 2x Network activity LEDs
- System Overheat LED / Fan fail LED /
UID LED
|
|
| PCI-Express |
- 1 (x4) PCI-E 2.0 (in x16 slot -Low Profile)
- 1 (x16) PCI-E 2.0 (for GPU card)
- 2 (x8) PCI-E 2.0 slots
|
|
|
| Hot-swap |
- 3x 3.5" Hot-swap SAS/SATA drive bays
|
|
|
| Fans |
- 8x 4cm heavy-duty counter-rotating PWM fans with optimal fan speed control
|
|
|
| CPU |
- Monitors for CPU Cores,+1.5V, +3.3V, +5V, +12V, +5 Stdby, +3.3 Stdby, VBAT, Memory Voltages.
- CPU Core 6-Phase-switching voltage regulator
|
| FAN |
- Total of four 4-pin PWM fans
- 4x fans with tachometer monitoring
- Status monitor for speed control
- Status monitor for on/off control
- Low noise fan speed control
|
| Temperature |
- Monitoring for CPU and chassis environment
- CPU thermal trip support
- Thermal Control for 4x Fan Connectors
- PSU I2C temperature sensing logic
- Thermal Monitor 2 (TM2) support
- PECI
|
| LED |
- Power Fail / Overheat LED
- Suspend-state Indicator LED
- UID LED
|
| Other Features |
|
|
|
RoHS
|
|
| Environmental Spec. |
- Operating Temperature: 10° to 35° C (50° to 95°F)
- Non-operating Temperature: -40° to 70° C (-40° to 158° F)
- Operating Relative Humidity: 8% to 90% (non-condensing)
- Non-operating Relative Humidity: 5 to 95% (non-condensing)
|
|
|
|
|
|
|
|
| Parts List - (Items Included) |
|
| |
Part Number |
Qty |
Descriptin |
| Motherboard / Chassis |
MBD-X8DTG-DF
CSE-818G-1400B |
1
1 |
Super X8DTG-DF Motherboard
1U Black SC818G Chassis |
| Air Shroud |
MCP-310-18008-0N |
2 |
Air Shroud |
| Hard Drive Tray |
MCP-220-00001-01 |
3 |
Hot-swappable Hard Drive Trays |
Add-On Card |
AOC-GPU-NVC1060 |
1 |
NVIDIA C1060 TESLA GPU/ACTIVE HEATSINK |
| Backplane |
BPN-SAS-818TQ |
1 |
Sup 3X SAS/SATA hdd; SATA con |
| Cable 1 | CBL-0333L |
2 |
GRAPHIC CARD POWER CABLE 8PIN TO 6+2PIN(40CM) |
| Cable 2 | CBL-0157L |
1 |
8pin to 8pin ribbon cable with tube for SGPIO, 40cm, PBF |
| Cable 3 | CBL-0315L |
3 |
35CM SATA FLAT S-S W/ LATCH PBF |
| CD |
CDR-X8 |
1 |
For X8 series |
| Riser Card |
RSC-R1UG-E16 |
1 |
RSC-R1UG-E16-O-P (left side PCIEx16 riser card) |
| Riser Card |
RSC-R1U-E16R |
1 |
RSC-R1U-E16R |
| Riser Card |
RSC-R1UG-2E8GR |
1 |
RSC-R1UG-2E8GR-O-P |
| Heatsink / Retention |
SNK-P0037P |
2 |
1U PASSIVE CPU HS FOR INTEL LGA1366 (HTP) |
| Power Supply | PWS-1K41F-1R |
1 |
1400W 1U GOLD LEVEL PWS W/ PM BUS & WX106MM |
| Cable 4 | CBL-0087 |
1 |
Front ctrl cable ROUND 16 TO 16 PIN RIBBON 20" |
| Fan 1 | FAN-0087L4 |
2 |
40x56,4 Pin PWM Fan Assembly for SC512F, 811 |
| Fan 2 | FAN-0102L4 |
6 |
40x56,4 Pin,PWM, Primary for SC818,825M, Secondary for SC815 |
| Mounting Rails | MCP-290-00054-0N |
1 |
Rail set, quick/quick, optional for 1U 17.2"W SC815 |
|
|
|
|
| Optional Parts List |
|
| |
Part Number |
Qty |
Description |
| Riser Card |
RSC-R1UG-UR |
- |
1U Riser Card |
| Peripheral Drive 1 | MCP-220-81502-0N |
- |
Slim SATA DVD kit for SC213,812S,813,815,816,818,819,825,836 |
|
|
|
|
|
