Основные характеристики
1. Two Six-Core / Quad-Core
AMD Opteron™ 2000 Series (Socket
F) support; HT3.0 Link support
2. Dual AMD SR5690 + SP5100 Chipset
PCI-E Gen2 support
3. Up to 128GB Registered ECC DDR2
800/667/533 SDRAM in 16 DIMM
4. Intel® 82576 controllers, Dual-Port GbE
5. Up to Four GPU cards
6. 4x PCI-e 2.0 x16, 2x PCI-e 2.0 x4
(in x8 slot), and 1x PCI slot
7. LSI 2008 8 port SAS2 controller,
RAID 0, 1, 10; RAID 5 Optional
8. 8x 3.5" Hot-swap SATA Drive Bays,
3x 5.25" Drive Bays
9. Integrated Matrox G200eW 16MB
Graphics
10. IPMI 2.0 with Dedicated LAN support
11. High-efficiency 1400W Redundant
Power Supplies (80 Plus Gold)
|
|
| AS-4021GA-62R+F |
- A+ Server 4021GA-62R+F (Black)
|
|
| CPU |
- Dual 1207-pin Socket F
- Supports up to two Six-Core / Quad-Core AMD Opteron™ 2000 Series processors**
- HT3.0 Link support
|
| Chipset |
- Dual AMD chipset SR5690 + SP5100
|
|
|
| Memory Capacity |
- Sixteen 240-pin DIMM sockets
- Support up to 128GB DDR2 800/667/533 MHz memory
- Dual channel memory bus
- Single or Dual (recommended) channel memory support
- For Dual CPUs: Recommended that memory be populated equally in adjacent memory banks
|
| Memory Type |
- DDR2 800/667/533 MHz Reg. ECC SDRAM 72-bit, 240-pin gold-plated DIMMs
|
| DIMM Sizes |
- 256MB, 512MB, 1GB, 2GB, 4GB, 8GB
|
| Memory Voltage |
|
|
|
| SATA |
- AMD SP5100 (RAID 0, 1, 10)
|
| SAS |
- LSI 2008 8 port SAS2 controller
- RAID 0, 1, 10; RAID 5 Optional
- Optional: AOC-SAS2-RAID5-KEY
RAID 5 support
|
| IPMI |
- Support for Intelligent Platform Management Interface v.2.0
- IPMI 2.0 with virtual media over LAN and KVM over LAN support
- Winbond® WPCM450 BMC
|
| Network Controllers |
- Intel® 82576 controller, Dual-Port
Gigabit Ethernet
- 10/100/1000BASE-T support
|
| VGA |
|
| Super I/O |
|
|
|
| SATA |
|
| SAS |
- Integrated LSI 2008 SAS2 controller support up to 8 SAS / SATA drives
|
| IDE |
- Single EIDE channel support up to two UDMA IDE devices
- Supports UDMA Mode 5
- Supports PIO Mode 4
- Supports ATA 100/133
|
| LAN |
- 2 RJ45 LAN ports
- 1 RJ45 Dedicated LAN supports IPMI
|
| USB |
- 6x USB 2.0 ports
- 2x Rear / 2x header / 2x type A
|
| VGA |
|
| Keyboard / Mouse |
- PS/2 keyboard and mouse ports
|
| Serial Ports |
- 1x Fast UART 16550 serial port
- 1x serial port header
|
|
|
| PCI-Express |
- 4x PCI-e 2.0 x16
- 2x PCI-e 2.0 x4 (in x8 slot)
|
| PCI |
|
|
|
| BIOS Type |
- 16Mb SPI Flash ROM with AMI® BIOS
|
| BIOS Features |
- Plug and Play (PnP)
- DMI 2.3
- PCI 2.2
- ACPI 2.0
- USB Keyboard Support
- SMBIOS 2.3
|
|
|
| Form Factor |
- Tower / 4U Rackmountable
- Optional Rackmount Kit
(MCP-290-00001-00)
|
| Model |
|
|
|
| Height |
|
| Width |
|
| Depth |
|
| Gross Weight |
|
| Available Colors |
|
|
|
| Buttons |
- LED Power On/Off button
- System Reset button
|
| LEDs |
- Hard drive activity LED
- 2x Network activity LEDs
- System Overheat LED
- Power Fail LED
|
| Ports |
|
|
|
| Hot-swap |
- 8x 3.5" Hot-swap SAS/SATA Drive Bays
|
| Peripheral Bay(s) |
- 3x 5.25" drive bays in storage module -
rotates 90° for Rackmount
- 1x 3.5" fixed drive bay
|
|
|
| Fans |
- 2x 5000 RPM Hot-swap Cooling Fans
- 1x 5000 RPM Hot-swap Rear Exhaust Fan
|
|
| AC Input |
- 1100W: 100 - 140V, 50 - 60Hz, 9.5 - 13.5 Amp
- 1400W: 180 - 240V, 50 - 60Hz, 7.0 - 9.5 Amp
|
DC Output
+5V standby |
|
DC Output
+12V |
- 92 Amp @ 100-140V
- 116 Amp @ 180-240V
|
| With Distributor |
- +5V: 30 Amp
- +3.3V: 24 Amp
- -12V: 0.6 Amp
|
| Certification |
80 PLUS Gold Certified
[ Test Report ]
|
|
|
| Software |
|
| Power Configurations |
- ACPI Power Management
- Wake-On-LAN (WOL) header
- Keyboard Wakeup from Soft-Off
- Power-on mode control for AC power loss recovery
|
|
|
| CPU |
- Monitors CPU Core Voltages, +1.8V, +3.3V, +5V, ±12V, +3.3V Standby, +5V Standby, VBAT, HT, memory, chipset
- CPU switching voltage regulator
|
| FAN |
- Up to 8-fan status tachometer monitoring
- Up to eight 4-pin Pulse Width Modulated
(PWM) fan connectors
- Status monitor for speed control
- Low noise fan speed control
|
| Temperature |
- Monitoring for CPU and chassis environment
- CPU Thermal Trip Support
- Thermal control for 8x Fan connectors
- I2C Temperature Sensing Logic
|
| LED |
- CPU / System Overheat LED
- +5V Standby Alert LED
|
| Other Features |
- Chassis Intrusion Detection
- Chassis Intrusion Header
|
|
|
|
|
|
|
|
| Parts List - (Items Included) |
|
| |
Part Number |
Qty |
Description |
| Motherboard / Chassis |
MBD-H8DA6+-F
CSE-747TG-R1400BP-SQ |
1
1 |
Super H8DA6+-F Motherboard
Dark Gray 4U SC747 Chassis with Redundant 1400W PS |
| Backplane |
BPN-SAS-747TQ |
1 |
HDD Backplane for SC747 Chassis |
| Cable(s) |
CBL-0118L-02
CBL-0173L
CBL-0071L
CBL-0216L
CBL-0286L |
2
1
1
4
2 |
79536-3210, 23cm IPASS TO 4 SATA
Internal to External FOR 1394 Connector
Round 16 to 16 pin ribbon FP cable, 30"
4 to 4 pin middle fan power extension, 200mm (PWM)
4 to 4 pin rear fan pwr ext w/ square header, 30cm (PWM) |
| Drive Bay(s) |
MCP-220-97301-0B
MCP-220-00073-0B
MCP-220-00074-0B |
8
1
2 |
3.5" HDD Tray
Black 5.25" drive tray without rail (SC747)
SC747 5.25" Dummy Cover |
| Fan(s) |
FAN-0091L4
Fan-0114L4 |
1
2 |
80x38mm 4-pin PWM fan
92x38mm, 4-pin PWM fan |
| Heat Sink |
SNK-P0024AP4 |
2 |
4Wire Active 2Pipe CPU heatsink for Socket F |
| Parts |
MCP-290-74502-0B
MCP-290-74701-0B
MCP-290-74702-0N
MCP-290-74703-0B |
1
1
1
1 |
Plastic feet (a set of 4)
Black plastic top cover for SC747 workstation
GPU card holder for SC747TQ
Fixed 3.5" dummy cover for SC747 |
| Power Supply |
PWS-1K41P-1R
PDB-PT747-4648
MCP-250-00003-00 |
2
1
1 |
1400W Gold Level high-efficiency power supply (redundant)
Power distributor for SC747 with graphic output feature
Plastic PDB Cover |
| Driver CD |
CDR-APLUS2 |
1 |
Driver CD for AMD SR56x0 and SP5100 chipset motherboards |
|
|
|
|
| Optional Parts List |
|
| |
Part Number |
Qty |
Description |
| Mounting Rails |
MCP-290-00059-0B |
- |
Rail set, quick/quick, default for 4U 17.2"W |
| Front Bezel |
MCP-210-74703-0B |
- |
Front bezel cover (for 5.25" bay) for rackmount |
|
|
|
** Opteron 237x, 238x, 239x, and 24xx supported
|
